DOCUMENT:Q201984  15-FEB-2001  [iis]
TITLE   :Error:"Procedure for service Content Filter in Qperf.dll Failed"
PRODUCT :Internet Information Server
PROD/VER::2.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Index Server version 2.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

After you install the Microsoft Windows NT Option Pack, the following errors may
occur in the Windows NT Event Log:

   Content Filter

   The open procedure for service "Content Filter" in Qperf.dll failed.
   Performance data for this service will not be available. Status code returned
   is DWORD0.

-or-

   Content Index

   The open procedure for service "Content Index" in Qperf.dll failed.
   Performance data for this service will not be available. Status code returned
   is DWORD0.

-or-

   ISAPI Search

   The open procedure for service "ISAPI Search" in Qperf.dll failed.
   Performance data for this service will not be available. Status code returned
   is DWORD0.

All of these error messages are logged as event ID 1008.

CAUSE
=====

The Performance Monitor counters for Index Server are not loaded correctly
during setup.

RESOLUTION
==========

There are two ways to resolve this problem:

 - Manually extract and load the Performance Monitor counters for Index Server.

   1. Use the Extract utility (Extract.exe) to extract the following files from
      the Windows NT Option Pack Is20.cab file:

       - Ciperfm.h
       - Filtperf.h
       - Perfwci.h
       - Perfci.ini
       - Perffilt.ini
       - Perfwci.ini

For additional information about the Extract utility, click the article number
below to view the article in the Microsoft Knowledge Base:

   Q132913 How to Use EXTRACT.EXE to Copy Files from DMF Disks

   2. Place these files in the \Winnt\System32 folder.

   3. In the System32 folder, type the following commands at a command prompt:

   "lodctr perfci.ini" (without the quotation marks)
   "lodctr perffilt.ini" (without the quotation marks)
   "lodctr perfwci.ini" (without the quotation marks)

-or-

 - Reinstall Index Server.

   1. Run the Windows NT Option Pack Setup.exe file.

   2. When prompted, click Add/Remove.

   3. In the list of components, clear the Index Server check box.

   4. Rerun Setup.exe.

   5. In the list of components, select Index Server.

MORE INFORMATION
================

Generally, these errors do not indicate a performance or functionality problem
with Index Server. Rather, they indicate that the Performance Monitor counters
are not loaded on the system. Index Server functions normally, but you cannot
run the Performance Monitor against it until you follow the steps in the
"Resolution" section.

Additional query words: 1008

======================================================================
Keywords          :  
Technology        : kbIdxServSearch kbAudDeveloper kbIdxServ200
Version           : :2.0
Issue type        : kbprb
Solution Type     : kbpending

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.