DOCUMENT:Q219062  08-MAY-2002  [winnt]
TITLE   :DHCPCMD Converts OptionID Parameter to Octal Value
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:4.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

The version of DHCPCMD available with the Windows NT 4.0 Service Pack 4 Resource
Kit update has an option to set subnet option values (SetSubnetOptionValue). If
you examine a DHCP server's registry, you will notice that OptionIDs contain
leading 0s (zeroes). If you pass a leading 0 to DHCPCMD, it converts the
optionID to an octal value and thus sets an option value that you may not have
intended to set.

RESOLUTION
==========

If, for example, you tried to set DHCP lease duration to one hour (3600 seconds)
on subnet 192-168.1.1 with the following command:

   DHCPCMD 192.168.1.254 SetSubnetOptionValue 192.168.1.1 051 DWORD 3600

You actually set option 041 (decimal) to a value of 3600. Option (decimal) 041 is
the IP address of NIS servers on the client subnet. 3600 is not a valid value
for this option.

To properly set the lease duration (or any other subnet option value), eliminate
the leading 0 from OptionID on the DHCPCMD command line. In this case, the
working version of the previous example would be:

   DHCPCMD 192.168.1.254 SetSubnetOptionValue 192.168.1.1 51 DWORD 3600

Note also that the registry value is not a DWORD but is a binary value. Most, if
not all, of the DHCP option values are stored in binary registry entries.
(Strings, IP addresses, byte data, and so forth). It is possible to set many of
the values by specifying DWORD as the type. If an option is of type STRING, then
STRING must be specified as the type.



STATUS
======

Microsoft has confirmed this to be a problem in Windows NT 4.0.

Additional query words:

======================================================================
Keywords          :  
Component         : ResourceKit
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : winnt:4.0
Hardware          : ALPHA x86
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.