DOCUMENT:Q223374  16-MAY-2002  [winnt]
TITLE   :Installing SP 4 Automatically Enables DHCP Logging
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:4.0 SP4
OPER/SYS:
KEYWORDS:kbWinNT4sp6fix

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 4.0, Terminal Server Edition 
 - Microsoft Windows NT Server version 4.0 SP4 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you install Windows NT 4.0 Service Pack 4, Dynamic Host Configuration
Protocol (DHCP) logging is automatically enabled and it cannot be disabled.

RESOLUTION
==========

Windows NT Server or Workstation 4.0
------------------------------------

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the
individual software update. For information on obtaining the latest service
pack, please go to:

 - http://www.microsoft.com/Windows/ServicePacks/

-or-

 - Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack

For information on obtaining the individual software update, contact Microsoft
Product Support Services. For a complete list of Microsoft Product Support
Services phone numbers and information on support costs, please go to the
following address on the World Wide Web:

   http://support.microsoft.com/default.aspx?scid=fh;EN-US;CNTACTMS


Windows NT Server 4.0, Terminal Server Edition
----------------------------------------------

To resolve this problem, obtain the latest service pack for Windows NT Server
4.0, Terminal Server Edition. For additional information, please see the
following article in the Microsoft Knowledge Base:

   Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack


STATUS
======

Microsoft has confirmed this to be a problem in the Microsoft products that are
listed at the beginning of this article. This problem was first corrected in
Windows NT Server version 4.0, Terminal Server Edition Service Pack 6.

MORE INFORMATION
================

By design, after you install the fix, it does not matter if logging is enabled
or disabled. DHCP will still create the DhcpSrvLog files. However, with logging
disabled, they will not grow in size.

Additional query words:

======================================================================
Keywords          : kbWinNT4sp6fix 
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400sp4 kbWinNTS400search kbNTTermServ400 kbNTTermServSearch
Version           : winnt:4.0 SP4
Hardware          : ALPHA x86
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.