DOCUMENT:Q235797 25-JUL-2001 [sms] TITLE :SMS: Client Logon Scripts Do Not Function over a RAS Link PRODUCT :Microsoft Systems Management Server PROD/VER::2.0 OPER/SYS: KEYWORDS:kbsetup kbClient kbConfig kbServer kbsms200 kbsms200bug ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Systems Management Server version 2.0 ------------------------------------------------------------------------------- SYMPTOMS ======== In Systems Management Server (SMS) version 2.0, some logon scripts on Microsoft Windows 2000-based clients may not function properly over a dial-up connection. This may result in Windows 2000-based clients not being installed with the complete SMS 2.0 client software. The client installation process may stop (hang) after installing Slownet.exe in the %SystemRoot%\MS\SMS\Core\Bin folder. CAUSE ===== The Windows 2000 dial-up networking adapter is automatically configured with a subnet mask of 255.255.255.255, regardless of the Dynamic Host Configuration Protocol (DHCP) or remote access server settings. When the IP address is matched against the subnet mask (255.255.255.255), the resulting IP subnet for the client is the client's IP address. WORKAROUND ========== One workaround for this behavior is to install the SMS client software on the Windows 2000-based clients while they are connected to the LAN. Then, enable Travel mode to prevent SMS client removal when the clients subsequently dial in. Users must always click No for potential de-assignment prompts. STATUS ====== Microsoft has confirmed this to be a problem in Systems Management Server version 2.0. Additional query words: prodsms boundry ====================================================================== Keywords : kbsetup kbClient kbConfig kbServer kbsms200 kbsms200bug Technology : kbSMSSearch kbSMS200 Version : :2.0 Issue type : kbbug Solution Type : kbnofix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.