DOCUMENT:Q236330 16-MAY-2002 [winnt] TITLE :Event Not Reset in ScsiClassGetInquiryData in SCSI Class Driver PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0 OPER/SYS: KEYWORDS:kbWinNT4sp6fix ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0, Terminal Server Edition - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Workstation version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you are using some third-party SCSI filter drivers, you may receive error messages that refer to either the SCSI class drivers or the third-party filter driver. The exact stop code will vary, with "STOP 0xA" and "STOP 0x1E" being the most common. CAUSE ===== The Windows NT SCSI Class driver does not properly handle a notification event when sending SCSI_IOCTL_GET_INQUIRY_DATA, so an underlying filter driver that handles the request asynchronously may cause an error message on a blue screen (STOP screen). This happens because the event being used to signal that the asynchronous request has been fulfilled is not reset properly on a retry of the request, causing the next I/O packet to be set before the request is finished. RESOLUTION ========== Windows NT Server or Workstation 4.0 ------------------------------------ To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the individual software update. For information on obtaining the latest service pack, please go to: - http://www.microsoft.com/Windows/ServicePacks/ -or- - Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack For information on obtaining the individual software update, contact Microsoft Product Support Services. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web: http://support.microsoft.com/default.aspx?scid=fh;EN-US;CNTACTMS Windows NT Server 4.0, Terminal Server Edition ---------------------------------------------- To resolve this problem, obtain the latest service pack for Windows NT Server 4.0, Terminal Server Edition. For additional information, please see the following article in the Microsoft Knowledge Base: Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack STATUS ====== Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT Server 4.0, Terminal Server Edition. This problem was first corrected in Windows NT Server 4.0 Service Pack 6 and Windows NT Server 4.0, Terminal Server Edition Service Pack 6. Additional query words: ====================================================================== Keywords : kbWinNT4sp6fix Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch Version : winnt:4.0 Hardware : ALPHA x86 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.