DOCUMENT:Q245632  13-JUN-2001  [sna]
TITLE   :Dial-Up AutoSync2 Link Service Support for SNA Server
PRODUCT :Microsoft SNA Server
PROD/VER:WINDOWS:2.11 (all versions),3.0 (all SP),4.0,4.0 SP1,4.0 SP2,4.0 SP3,4.0 U.S. SP1
OPER/SYS:
KEYWORDS:sna4

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, versions 2.11 SP1, 2.11 SP2, 3.0 SP1, 3.0 SP2, 3.0 SP3, 3.0 SP4, 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3, 4.0 U.S. SP1 
-------------------------------------------------------------------------------

SUMMARY
=======

Serengeti Systems Incorporated offers a Hayes AutoSync2 compatible link service
for SNA Server that allows an SDLC connection through an asynchronous
communication port. It is specific to Hayes AutoSync2 and does not support
earlier versions of Hayes AutoSync.

MORE INFORMATION
================

The Link Service requires a Hayes Optima 33.6 or 56kb modem with AutoSync2
support. The part number for the 33.6 modem is 08-02688 and the 56kb modem is
08-02892. These are the only two modems that this link service works with.

To install the link service, do the following:

1. Run the setup routine provided with the software. You will be prompted for a
   password, which must be entered.

2. Install the Link Service in SNA Server by choosing Insert, and then selecting
   Link Service.

3. Open the property sheet for the link service and choose Run License Manager.

4. Choose First Run Authorization. This provides a 7-day window of activation.
   After 7 days, it is necessary to contact Serengeti Systems Incorporated to
   obtain a Full License Authorization.

5. The Link service is SSIAUTOx and is configured with the necessary
   initialization strings, COM port settings, and dial mode settings. The
   default initialization strings should work without modification. The phone
   number to dial is configured in the Connection Properties. COM1 through
   COM256 are supported, as well as tone or pulse dial.

To configure a connection, do the following:

1. Choose Insert Connection, and then choose SDLC.

2. On the general sheet of the Connection Properties, select SSIAUTOx.

3. Select the Address sheet, and then enter the phone number to dial in the Dial
   Data field.

All other settings are configured as with any other SDLC connection.
Tracing is accomplished through the trace utility or a built-in trace function
that has the capability to trace the Link Service and/or the Device Driver, and
is enabled thorough the Link Service Properties sheet.

The Link Service Software is removed using the Add/Remove program in Control
Panel.

The third-party products discussed in this article are manufactured by vendors
independent of Microsoft; we make no warranty, implied or otherwise, regarding
these products' performance or reliability.

REFERENCES
==========

www.serengeti.com

The third-party contact information included in this article is provided to help
you find the technical support you need. This contact information is subject to
change without notice. Microsoft in no way guarantees the accuracy of this
third-party contact information.

Additional query words:

======================================================================
Keywords          : sna4 
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ400 kbSNAServ211SP1 kbSNAServ211SP2 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ400SP2 kbSNAServ400SP3 kbSNAServ300SP2 kbSNAServ300SP4
Version           : WINDOWS:2.11 (all versions),3.0 (all SP),4.0,4.0 SP1,4.0 SP2,4.0 SP3,4.0 U.S. SP1
Issue type        : kbinfo

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.