DOCUMENT:Q270912 11-JUN-2002 [sms] TITLE :SMS: "#$#$#$#$#$ ERROR" Appears in Clisvc.log File PRODUCT :Microsoft Systems Management Server PROD/VER::2.0,2.0 SP1,2.0 SP2 OPER/SYS: KEYWORDS:kbsms200 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Systems Management Server versions 2.0, 2.0 SP1, 2.0 SP2 ------------------------------------------------------------------------------- IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base: Q256986 Description of the Microsoft Windows Registry SUMMARY ======= This article covers some of the most common reasons why the error "#$#$#$#$#$ Error" appears in the Clisvc.log file on a Systems Management Server (SMS) client. This error is an indication of a file Cyclic Redundancy Check (CRC) mismatch between the client and the site server. The mismatch could appear in the registry or the file structure between the two. This article will help you identify where the problem originates. MORE INFORMATION ================ In the Clisvc.log file on a client, the following error is reported: Verifying application [C:\WINNT\MS\SMS\clicomp\SWDist32\bin\ODPUSR32.exe]~ $$ 2000>

#$#$#$#$#$ ERROR: The Client Service is not authorised to run this application! (5)~ $$ *** WNet User Groups Offer Data Provider - Error launching (#0x5) $$ !!!WARNING: Problem starting App (5). Doing App Verify. $$ Creating, Storing, and Using CRC Information -------------------------------------------- When the SMS_Executive service is started, the Client Install Data Manager (CIDM) calculates the CRCs for particular files in the SMS\bin\ folder. These files include but are not limited to the following: - Ccim32.dll - Chksnmp.exe - Cqmgr32.dll - Hinv32.exe - Odpsys32.exe - Odpusr32.exe - Rcclicfg.exe - Sinv32.exe - Smsapm32.exe The raw CRC values for each of these files are stored in memory and are not recorded anywhere on the hard disk drive for security reasons. CIDM then encrypts these values and writes them to the Clibase.cfg and Cli_inst.cfg files on the site server under the SMS\Inboxes\clidata.src folder. These files are also replicated out to the Client Access Points (CAPs) and Logon Points within the site. During the client installation process, these CRC values are written to the registry of the client under the following registry keys: HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Configuration\Verification Data\ HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Sites\Shared\\configuration\client properties\reserved1\ When the CLISVC begins to launch the individual components after a client installation or upgrade, it decrypts the stored values from the registry and then compares them against the CRC of the file that it is attempting to launch. CLISVC checks for a match under the Verification Data key and if this fails, it then attempts to find a match under the Reserved1 registry key mentioned above. If these values do not match, then the error above is reported in the Clisvc.log file for the corresponding component. If a match is found in the Reserved1 key, the correct value is then written to the Verification Data key. Troubleshooting --------------- WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. In the following example of troubleshooting, a client is generating the Client Service not authorized error for Odpusr32.exe. To troubleshoot this issue, follow these steps: 1. Perform a file comparison of the files installed versus the source files. If there are differences in the file's date and time stamp or byte count, this could be the problem. 2. Check the client and verify the value under the following key: HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Configuration\Verification Data If it exists, check the client and verify whether this value and the following key contain information about the component that is generating the errors in the Clisvc.log file: HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Client\Sites\Shared\\configuration\client properties\reserved1 If these keys match, then there is likely a CRC generation problem in which the following steps will help to correct. If the keys do not match, run the Systems Management Server 2.0 Client Cleaner utility (20CLICLN.BAT) on the client and allow it to reinstall. This may correct the issue. 3. Review the following article and follow its steps: Q246331 CRC Checking and Installation of Client-Side Hotfixes If the procedure in this article does not correct the problem, proceed to the next step. 4. Determine the bundled executable file that contains the client's copy of the file. In our example, Swdist32.exe contains the version of Odpusr32.exe that the clients will be installing. This is accomplished by extracting the files from the bundle and performing a file comparison between the extracted Odpusr32.exe and the Odpusr32.exe located in the Bin\I386 directory. To extract the files from the bundled executable file, follow these steps: a. Run the following command: SWDIST32.EXE /X b. Select the file or files to extract and click OK. c. When prompted, specify the directory to which each will be saved. To perform the file comparison from a command prompt, type the following: FC /b and then press ENTER. 5. Check the CAPs in the site to confirm that the bundles match what is on the site server. Because we are testing with Swdist32.exe, we find this file under the CAP_\clicomp.box\SWDist\ folder. 6. Perform a binary file comparison as mentioned in step 4, referencing the paths to the Swdist32.exe on the site server under SMS\inboxes\clicomp.src\SWDist\ folder against the Swdist32.exe located under CAP_\clicomp.box\SWDist\ folder. 7. Because we know at this point the Odpusr32.exe file on the site server matches the Odpusr32.exe contained in the Swdist32.exe bundle, now compare the Odpusr32.exe file found on the client to that of the site server under the Bin\ folder. The files should be located under %systemdir%\MS\SMS\Clicomp\\ on each client. NOTE: If after all of the checking from the previous steps, the problem persists yet everything checks out, it is likely that CRC values being referenced in this problem are incorrect and need to be regenerated. Continue through steps 8 and 9 for information on correcting this. 8. Check the site properties on the Cli_inst.cfg file on the site server under SMS\Inboxes\clidata.src for the create and modified dates. The create date should be the day the site was originally installed and the modified date should be on or after the date the most recent service pack or hot fix was applied to the site. If, after checking, these dates do not match up or they appear to be incorrect, please note the date and time stamps. 9. To regenerate the files and allow the CIDM service to rewrite the CRC values for these files, begin by stopping all Systems Management Server Services on the site server, including the SMS_Executive, SMS_Site_Component_Manager, and SMS_SQL_Monitor services. 10. Rename the Cli_inst.cfg and Clibase.cfg files on the site server under the SMS\Inboxes\clidata.src folder. 11. Restart all of the services on the Systems Management Server site server. 12. Because these files will not be re-created on their own, a change to a referenced system component will need to be made. A small check like adding a new Client Connection Account will cause these files to be regenerated. 13. Monitor the site's CAPs and SMSLOGON shares to see when the Cli_inst.cfg and Clibase.cfg files get updated. 14. Once these files are updated, restart and monitor a client to verify that it is able to start the failing component. NOTE: If at any point during the preceding steps, you do not get a successful test, this is likely where the problem originates. REFERENCES ========== For additional information, click the article number below to view the article in the Microsoft Knowledge Base: Q246331 SMS: CRC Checking and Installation of Client-Side Hotfixes Additional query words: prodsms authorized ====================================================================== Keywords : kbsms200 Technology : kbSMSSearch kbSMS200 kbSMS200SP1 kbSMS200SP2 Version : :2.0,2.0 SP1,2.0 SP2 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.