DOCUMENT:Q280762 12-JUN-2001 [sna] TITLE :INFO: Contents of the SNA Server 4.0 Service Pack 4 Readme.txt F PRODUCT :Microsoft SNA Server PROD/VER::4.0 SP4 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, version 4.0 SP4 ------------------------------------------------------------------------------- SUMMARY ======= This article is a copy of the Microsoft SNA Server 4.0 Service Pack 4 ReadMe.txt file. For additional information about how to obtain SNA Server 4.0 Service Pack 4, click the article number below to view the article in the Microsoft Knowledge Base: Q215838 How to Obtain the Latest SNA Server 4.0 Service Pack MORE INFORMATION ================ Microsoft SNA Server 4.0 Service Pack 4 (SP4) Electronic Release Notes Revision History ================ November 28, 2000 - Posted released version of SNA 4.0 SP4 - Copyright Microsoft Corporation, 1997, 1998, 1999, 2000 These materials are provided "as-is," for informational purposes only. Neither Microsoft nor its suppliers makes any warranty, express or implied with respect to the content of these materials or the accuracy of any information contained herein, including, without limitation, the implied warranties of merchantability or fitness for a particular purpose. Because some states/jurisdictions do not allow exclusions of implied warranties, the above limitation may not apply to you. Neither Microsoft nor its suppliers shall have any liability for any damages whatsoever including consequential incidental, direct, indirect, special, and loss profits. Because some states/jurisdictions do not allow exclusions of implied warranties, the above limitation may not apply to you. In any event, Microsoft's and its suppliers' entire liability in any manner arising out of these materials, whether by tort, contract, or otherwise shall not exceed the suggested retail price of these materials. ===================================================================== Ordering the SNA Server 4.0 Service Pack 4 CD ---------------------------------------------- Microsoft SNA Server 4.0 U.S. Service Pack 4 (SP4) is available in CD media format by ordering the following part number from Microsoft by calling (800) 936-3500: 211-00425 SNA Svr 4.0 English Patch CD SP4 Downloading SNA Server 4.0 Service Pack 4 ------------------------------------------ Self-extracting executable files that contain updated 4.0 SP4 SNA Server and client files can be downloaded electronically from the following Microsoft Web site: www.microsoft.com/sna/download/sna4sp4.asp The following files comprise the updated SNA Server and client files for SNA Server 4.0 SP4: 40Sp4is.exe - 4.0 SP4 Server Update (Intel) (see NOTE 1, 2, 4) 40Sp4ic.exe - 4.0 SP4 Microsoft Windows NT Client Update (Intel) (see NOTE 2, 4) 40Sp49x.exe - 4.0 SP4 Microsoft Windows 9x Client Update (see NOTE 2) 40Sp4clr.exe - 4.0 SP4 Microsoft Windows 3.x, MS-DOS, Web Client Refresh (see NOTE 3) 40Sp4ihs.exe - 4.0 SP4 Host Security Refresh (Intel) (see NOTE 4) 40Sp4mq.exe - 4.0 SP4 MSMQ-MQSeries Bridge All of these files are self-extracting Win32 executables. For information about changes and new features that are implemented in 4.0 SP4, see the Kbhelp.chm and Readme.txt release notes files, which are included in the 40Sp4is.exe file. The Kbhelp.chm file includes links to Microsoft Knowledge Base articles that describe the symptoms and causes for problems that are fixed in the service pack, as well as fixes that are implemented in SNA Server 4.0 SP1, 4.0 SP2, and 4.0 SP3. NOTE 1: The SNA Server 4.0 SP4 includes updates to the SNA Server, Print Service, COM Transaction Integrator, SNA OLE/DB Interface, TN3270 Service, TN5250 Service, AFTP, and Shared Folders Gateway. NOTE 2: Once the 4.0 SP4 update is applied, there is no way to uninstall (or "roll back") the service pack without reinstalling the previous SNA Server 4.0 release. The SNA SDK files are included in these self-extracting images and will be automatically upgraded as a part of running the Update program. NOTE 3: The SNA Server Windows 3.x, and MS-DOS clients are still unchanged from SNA 4.0 SP1. There is no update installer for these clients. The Web-installable clients have been updated in SNA 4.0 SP4. NOTE 4: SNA Server 4.0 SP4 does not include any updates for Alpha systems. All updates are for Intel-based systems. Instructions for Decompressing the Server or Client Update Files ---------------------------------------------------------------- The SNA Server and client update files automatically extract and run the Update program. When extracted, these files require the following free disk space: Server Update (Intel) - 40Sp4is.exe: 165 MB Windows NT Client Update (Intel) - 40Sp4ic.exe: 103 MB Microsoft Windows 95 Client Update - 40Sp49x.exe: 43 MB Microsoft recommends that these files are extracted to a persistent, shared network location and made available to server and client computers across the network. Users can then connect to this shared folder and install the service pack by running the Update program from this network location. To do this, perform the following steps: 1. Extract the desired service pack files to one or more folders on a network server: These files can be extracted to a separate folder by using the /x or /X option. For example: 40SP4IS /x 2. Share the desired service pack files to network users. The full folder structure of the extracted files must be available to the user who runs the Update program. For example, "40SP4IS /X" will extract into the following folder structure: \ \I386\... (SNA Server 4.0 SP4 files) \Reg2udl (utility used by Setup) Similarly, the SNA Windows NT Intel client update (40Sp4ic.exe) extracts into the following folder structure: \ \Clients\Winnt\I386 (SNA Server 4.0 SP4 Windows NT client files) \Reg2udl (utility used by the Setup program) 3. Users must run the Update program to install the service pack. To apply the service pack, the Update program should be run from the appropriate shared program: SNA Server (Intel): \I386 SNA Windows NT client (Intel): \Clients\Winnt\I386 SNA Windows 9x client: \Clients\Win9x ********************************************************************** WARNING: The Update.exe program should always be used to install the service pack, which automatically spawns the Setup program in "quiet" mode and requires limited user interaction. The Setup program should not be run directly, because the user will be required to select the existing installation path, user credentials, and components to install. If these options are chosen incorrectly, this can damage the installation of the service pack on the destination computer. ********************************************************************** If the self-extracting files are run without the /X option, the Update program will be run automatically. When running Update automatically, all files are automatically extracted to the folder where the TMP, TEMP, or WINROOT environment variable is pointing (trying in that order). So, if the SET command shows that TMP=C:\TMP, and C: does not have sufficient storage to extract the files, change TMP to point to a drive that has sufficient space. For example: SET TMP=D:\Temp NOTE: Once Update has completed, the SNA Server source installation folder will point to the folder where Update was run. If SNA Setup is run from SNA Server program group, Setup will attempt to locate this folder when adding or removing SNA Server components. For more information about the service pack installation process and possible errors that might occur, see the "More Information" section in this Readme. Installing the New OLE/DB Provider and ODBC Driver for DB2 ---------------------------------------------------------- SNA Server 4.0 SP2 includes a new OLE DB Provider for DB2 and ODBC Driver for DB2 from Microsoft, while previous versions of SNA Server include a version that is licensed from StarQuest. SNA 4.0 SP4 includes an update to the SNA 4.0 SP2 and SP3 versions. When you upgrade from SNA 4.0 or SNA 4.0 SP1 systems to SNA 4.0 SP4, the server or client computer must first be upgraded to SNA 4.0 SP4 by running the Update program from a persistent location (that is, a location where the full extracted files exist). Once installed, the new drivers may be installed by running the SNA Setup program from the local SNA Server Program group and by choosing these new components after selecting Add/Remove Components from Control Panel. Installing the New MSMQ-MQSeries Bridge --------------------------------------- SNA Server 4.0 SP2 includes the new MSMQ-MQSeries Bridge. The SNA 4.0 SP4 includes an updated version of the Bridge (40Sp4mq.exe). This feature is only supported on an Microsoft SNA Server 4.0 SP2, SP3, or SP4 system. For more information about this feature, refer to the License.txt and Readme files that are included in 40Sp4mq.exe. Upgrading Host Security to 4.0 SP4 ---------------------------------- The Host Security updates for SNA 4.0 SP4 (40Sp4ihs.exe) must first be extracted to a folder. To upgrade SNA Server 4.0, 4.0 SP1, 4.0 SP2, or 4.0 SP3 Host Security to 4.0 SP4, the Setup program must be run and the current installation folder and Windows NT user context must be entered. No Update program is provided to upgrade the Host Security components to 4.0 SP4. Upgrading SNA Windows 3.x and MS-DOS Clients to 4.0 SP4 ------------------------------------------------------- The 40Sp4clr.exe file contains the SNA Server Windows 3.x, a Web- installable version of the SNA Microsoft Windows 95, Microsoft Windows 98, and Windows 3x clients, and MS-DOS and OS/2 client files. The 40Sp4clr.exe file is a Win32 self-extracting executable. The administrator must first run this file and choose a folder directory in which to place the extracted files. Windows 3.x clients may then connect across the network and run the Setup program to install the client files. The Setup program can be used to upgrade a previous version of the SNA client software. NOTE: The SNA Windows 3.x and MS-DOS clients are unchanged since SNA 4.0 SP1, though the Web-installable client CAB files have been updated in SNA 4.0 SP4. Installing the Updated 4.0 SP4 SDK ---------------------------------- The SNA Server 4.0 SP4 Server, Windows NT, Windows 95, and Windows 98 client include the SDK files. Also, the Update program that is automatically spawned when these self-extracting files are run (40Sp4is.exe, 40Sp4ic.exe, 40Sp49x.exe) will update the SDK files if the SDK option was initially chosen during SNA Server 4.0 installation. Installing the Service Pack Files --------------------------------- Both the SNA Server and SNA client files have been updated in 4.0 SP4. Updates may be applied in any order--to the server and/or to the clients. Microsoft recommends that all systems that are running SNA Server 4.0 (that is, SNA Servers and client computers) be updated to 4.0 SP4. It may not be necessary to update the client computers to SP4 unless you are experiencing a client problem that has been fixed in SP4. WARNING: This service pack update is intended to be applied on systems that are currently running SNA Server 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3 server or client software. These updates cannot be applied over systems that are running SNA Server 3.x or 2.x releases. ** TO BE APPLIED TO SNA SERVER 4.0 SYSTEMS ONLY!! ** More Information ---------------- As noted above, if /X option is not used, the file is self-extracted to the folder where the TMP environment variable is pointing. For example, if TMP=C:\Temp, then the C: drive (where this folder exists) must have sufficient disk space to accommodate the extracted image. If there is insufficient disk space to accommodate the image size, the following error message is displayed: Extraction Failed Access is denied If this error message occurs, a temporary read-only file may be left in the TMP folder tree (for example, in C:\Temp\Ext5232\I386\Setup.tdf), which may cause the service pack file to continue to fail with the message, "Access is denied." To correct this problem, delete the file indicated in "To Directory:" within the progress dialog box when the "Access is denied" error is displayed. This file may have the "read only" attribute set, so the ATTRIB command may be needed to remove this attribute in order to delete this file. For example: ATTRIB -r When the Update program is run, it displays the following warning: WARNING You are about to update your current installation of SNA Server with SNA Server 4.0 with Service Pack 4. You will not be able to deinstall this Service Pack and get back to your original setup. Click Yes if you wish to proceed. Choose Yes to continue (the default is No). If the following error occurs, then SNA 4.0 SP4 has already been installed: Setup Error 689 Setup cannot update an installation interactively in Quiet mode. Setup Error 723 Setup was unable to read configuration information from the first section of the setup file: C:\SNA40\setup\server\snafile.stf If these errors occur and you want to re-apply SNA Server 4.0 SP4, perform the following steps: 1. Delete \Setup\Server\Snafile.stf. 2. Modify the following registry value: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SNA Server\CurrentVersion\ SNAVersion: REG_SZ: 4.0 Service Pack 4 3. Change "4.0 Service Pack 4" to "4.0 Service Pack 3" (without the quotation marks). 4. Run the Update program again. Additional query words: ====================================================================== Keywords : Technology : kbAudDeveloper kbSNAServSearch kbSNAServ400SP4 Version : :4.0 SP4 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.