DOCUMENT:Q216918  07-MAY-2002  [homegame]
TITLE   :Err Msg: Combat Flight Simulator Requires a Higher Refresh Rate
PRODUCT :Microsoft Home Games
PROD/VER::1.0
OPER/SYS:
KEYWORDS:kbdisplay kberrmsg kbimu msgame

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Combat Flight Simulator: WWII Europe Series, version 1.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you start a flight in Microsoft Combat Flight Simulator, you may receive an
error message indicating that the program requires a higher refresh rate than
your monitor supports.

CAUSE
=====

This behavior can occur if Combat Flight Simulator attempts to change the
default refresh rate your video adapter sends to your monitor.

RESOLUTION
==========

To resolve this issue, download and install the latest version of DirectX from
the following Microsoft Web site:

   http://www.microsoft.com/directx

For additional information about how to download and install DirectX, please see
the following article in the Microsoft Knowledge Base:

   Q179113 How to Download and Install DirectX

If the issue continues to occur, set the default refresh rate your video adapter
sends to your monitor. To do this, follow these steps:

1. Click Start, and then click Run.

2. In the Open box, type Dxdiag.exe, and then click OK.

3. Click the More Help tab, and then click Override.

4. Click the Override Value option, and type a value in the Override Value box
   that is supported by both your video adapter and your monitor.

   NOTE: Typical values are 60, 72, and 75.

To determine a value that is supported by both your video adapter and your
monitor, follow these steps:

1. Click Start, point to Settings, and then click Control Panel.

2. Double-click Display.

3. On the Settings tab, click Advanced or Advanced Properties.

4. On the Monitor tab, make sure your monitor is selected. If an incorrect
   monitor is selected, or if a standard or unknown monitor is selected, click
   Change, click the manufacturer and model of your monitor, and then click OK.

5. On the Adapter tab, click the Refresh Rate box.

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft Combat Flight
Simulator: WWII Europe Series, version 1.0.

Additional query words: 1.00 msgame combatfs cfs

======================================================================
Keywords          : kbdisplay kberrmsg kbimu msgame 
Technology        : _IKkbbogus kbGamesSearch kbCombatFlightSim kbCombatFlightSimSearch kbSimSearch
Version           : :1.0
Issue type        : kbbug
Solution Type     : kbpending

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2002.