DOCUMENT:Q231538  14-SEP-2001  [automap]
TITLE   :MapPoint 2000: Zooms In Unexpectedly on an Enclosed Box
PRODUCT :Microsoft Automap
PROD/VER:WINDOWS:
OPER/SYS:
KEYWORDS:kbenv kbui kbimu

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MapPoint 2000 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you copy graphics or export data from inside an enclosed box in Microsoft
MapPoint 2000, the program may unexpectedly zoom in on the enclosed box.

CAUSE
=====

This behavior can occur if either of the following conditions is true:

 - Your pointing device is configured to double-click when you left-click.

 - You right-click inside the enclosed box, and then double-click Copy or
   "Export to Excel."

RESOLUTION
==========

To resolve this issue, use one of the following methods.

Copy Graphics Inside the Enclosed Box
-------------------------------------

To do this:

1. Configure your pointing device to single-click when you left-click.

   NOTE: If you are using the Microsoft IntelliPoint software, follow these
   steps.

   a. Click Start, point to Settings, and then click Control Panel.

   b. Double-click Mouse.

   c. On the StepSavers tab, under ClickSaver, click to clear the "Single-click
      where you normally double-click" check box.

   d. Click OK, and then close Control Panel.

2. Right-click inside the enclosed box, and then click Copy.

Export Data from the Enclosed Box
---------------------------------

To do this:

1. Configure your pointing device to single-click when you left-click.

   NOTE: If you are using the Microsoft IntelliPoint software, follow these
   steps.

   a. Click Start, point to Settings, and then click Control Panel.

   b. Double-click Mouse.

   c. On the StepSavers tab, under ClickSaver, click to clear the "Single-click
      where you normally double-click" check box.

   d. Click OK, and then close Control Panel.

2. Right-click inside the enclosed box, and then click "Export to Excel."

STATUS
======

Microsoft has confirmed this to be a problem in Microsoft MapPoint 2000.

Additional query words: mp2000 zooming intellimouse trackball

======================================================================
Keywords          : kbenv kbui kbimu 
Technology        : kbHomeProdSearch kbMapptSearch kbMapPoint2000
Version           : WINDOWS:
Issue type        : kbbug
Solution Type     : kbpending

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.