DOCUMENT:Q125440 11-DEC-1999 [homemm] TITLE :Modifications to System Files Made by Media Vision Premium/Pro PRODUCT :Microsoft Home Multimedia Titles PROD/VER:: OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Media Vision Premium 3-D Sound Card - Media Vision Pro 3-D Sound Card ------------------------------------------------------------------------------- SUMMARY ======= This article lists the modifications made to the following configuration files when you install the Media Vision Premium 3-D or Media Vision Pro 3-D sound card: - CONFIG.SYS - AUTOEXEC.BAT - SYSTEM.INI For additional information about Media Vision products, contact: - Media Vision's bulletin board service (BBS): (510) 770-0968 - Media Vision's Word-Wide Web site on the Internet: http://www.mediavis.com - Media Vision's CompuServe forum: GO MEDIAVISON - Media Vision product support, phone: (503) 882-1177 CONFIG.SYS ---------- DEVICE=C:\MEDVSN\PA3D.SYS A220 D1 I7 H7 M320 Q2 AUTOEXEC.BAT ------------ SET BLASTER=A220 I7 D1 H7 T4 SYSTEM.INI ---------- [BOOT] SOUND.DRV=MMSOUND.DRV DRIVERS=MMSYSTEM.DLL MSMIXMGR.DLL MMMIXER.DLL [386ENH] DEVICE=VPA3DD.386 DMABUFFERSIZE=064 [MCI] CDAUDIO=MCICDA.DRV [DRIVERS] WAVE=PA3DWAVE.DRV MIXER=PA3DMXD.DRV MIDI=MVIFM.DRV MIDI1=PA3D401.DRV [PA3DWAVE.DRV] PORT=220 INT=7 DMACHANNEL=1 DMACHANNEL2=7 [PA3D401.DRV] INT=2 PORT=320 BOARD=0 Entries Appearing in the Control Panel -------------------------------------- Media Vision 401 Midi Driver Media Vision FM Synth Driver Media Vision Mixer Driver Media Vision Wave Driver MIDI Mapper Timer [MCI]CD Audio [MCI]MIDI Sequencer [MCI]Sound MORE INFORMATION ================ Possible CONFIG.SYS file PA3D.SYS parameters may be: A# Base addresses for the sound card: 210, 220, 230, 240, 250, 260. DO NOT use 230 unless the sound card's SCSI host address is removed. Default is A220. D# Sound Blaster 8-bit DMA channels 1 and 3. Default is D1. I# IRQ assignment for the board: 2,3,5,7,10, and 15. Default is I7. H# 16-bit DMA channel: 5 and 7. Default is H7. NOTE: on the Media Vision Premium 3-D, the 16-bit DMA channel can also be set to 1 M# MPU-401 emulation base address: 300, 310, 320 and 330. Default is M320. Q# MPU-401 emulation IRQ: 2, 3, 5, and 7. Default is Q2. Optional Parameters V Displays all hardware settings during driver load. N Don't print sign-on banner. The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: kbhowto multi media multimedia multi-media kbdisplay kbsound kbhw mmtitles audio 3d ====================================================================== Keywords : Technology : kb3rdpartySearch kbZNotKeyword3 Version : : ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.