DOCUMENT:Q138866  07-MAY-2001  [visualc]
TITLE   :HOWTO: How to Set Default Values for Stock Properties in OLE Con
PRODUCT :Microsoft C Compiler
PROD/VER:winnt:2.0,2.1,2.2,4.0,4.1
OPER/SYS:
KEYWORDS:kbcode kbnokeyword kbActiveX kbCOMt kbCtrlCreate kbMFC kbVC200 kbVC400 kbVC410 kbGrpDSM

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Visual C++, versions 2.0, 2.1, 2.2, 4.0, 4.1 
-------------------------------------------------------------------------------

SUMMARY
=======

When developing an OLE Control, you may decide that some of the properties
should be serialized. This can be accomplished in the DoPropExchange() method of
your COleControl-derived class by using the PX_ functions. The PX_ functions
also allow you to specify a default value for the property, which is good
programming practice. You may also want to give default values to any stock
properties that are used by your control. The serialization and initialization
of stock properties is handled by MFC in COleControl::DoPropExchange(pPX). To
set a default value for a stock property, you need to work around some of MFC's
functionality. This article explains how to do it.

MORE INFORMATION
================

When you use the Microsoft Control Developer's Kit (CDK) to create the MFC
framework for an OLE Control, it creates a COleControl-derived class with an
overridden DoPropExchange() member function. By default, the overridden
DoPropExchange() calls COleControl::DoPropExchange(). This in turn calls
COleControl::ExchangeStockProps(), which contains the MFC code for serializing
stock properties.

Within this function, MFC uses the COleControl m_dwStockPropMask protected member
variable to determine which stock properties you have added with Class Wizard.
This mask can be modified in your DoPropExchange() to force MFC to ignore
existing stock properties and therefore allow you to add your own code. Ideally
you should copy the relevant code already present in
COleControl::ExchangeStockProps(), and then modify it as necessary.

The following sample code shows how to accomplish this for the Caption stock
property by modifying step three of the Circ OLE Control tutorial.

Sample Code
-----------

   // MANUAL CONTROL OF MAKING Caption PERSISTANT.
   // To test the initialization of the caption stock property
   // replace the circle3 samples DoPropExchange function with the
   // following version.

   // These #defines can be found in the ..\Msvc20\Cdk32\Src\Ctlprop.cpp
   // file and are given here to remove the need to continually track them
   // down. In the code, only STOCKPROP_CAPTION is used.
   #define STOCKPROP_BACKCOLOR     0x00000001
   #define STOCKPROP_CAPTION       0x00000002
   #define STOCKPROP_FONT          0x00000004
   #define STOCKPROP_FORECOLOR     0x00000008
   #define STOCKPROP_TEXT          0x00000010
   #define STOCKPROP_BORDERSTYLE   0x00000020
   #define STOCKPROP_ENABLED       0x00000040

   void CCirc3Ctrl::DoPropExchange(CPropExchange* pPX)
   {
      ExchangeVersion(pPX, MAKELONG(_wVerMinor, _wVerMajor));
      BOOL bLoading = pPX->IsLoading();

      CString strText;
      if (!bLoading)
         strText = InternalGetText();

      PX_String(pPX,_T("Caption"),strText,_T("Caption"));
      if (bLoading) {
         TRY
            SetText(strText);
         END_TRY
      }

      // Mask out the Caption stock property before
      // calling the base class functionality.
      m_dwStockPropMask &= ~STOCKPROP_CAPTION;

      // Call the base class.
      COleControl::DoPropExchange(pPX);

      // Mask the Caption property bit back in to minimize
      // possible side effects.
      m_dwStockPropMask |= STOCKPROP_CAPTION;

      if (pPX->GetVersion() == (DWORD)MAKELONG(_wVerMinor, _wVerMajor))
      {
         PX_Bool(pPX, _T("CircleShape"), m_circleShape, TRUE);
         PX_Short(pPX, _T("CircleOffset"), m_circleOffset, 0);
         PX_Long(pPX, _T("FlashColor"), (long &)m_flashColor,
                         RGB(0xFF, 0x00, 0x00));
         PX_String(pPX, _T("Note"), m_note, _T("Note"));
      }else if (pPX->IsLoading()) {
         m_circleShape = TRUE;
         m_circleOffset = 0;
         m_flashColor = RGB(0xFF, 0x00, 0x00);
         m_note = _T("");
      }
   }

REFERENCES
==========

The functions discussed in this article can be found using the Find in Files
feature of Visual C++; in version 2.x within the Cdk32\Src directory and in
version 4.x within the mfc\src subdirectory.

Additional query words: 2.00 2.10 2.20 3.0 3.1 3.2 3.00 3.10 3.20 4.00 4.10 cdk ocx initialize

======================================================================
Keywords          : kbcode kbnokeyword kbActiveX kbCOMt kbCtrlCreate kbMFC kbVC200 kbVC400 kbVC410 kbGrpDSMFCATL 
Technology        : kbVCsearch kbVC400 kbAudDeveloper kbVC220 kbVC410 kbVC200 kbVC210
Version           : winnt:2.0,2.1,2.2,4.0,4.1
Issue type        : kbhowto

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.