DOCUMENT:Q76916  26-NOV-1999  [msdos]
TITLE   :Size of Expanded Memory Pool Adjusted
PRODUCT :Microsoft Disk Operating System
PROD/VER:MS-DOS:5.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system version 5.0 
-------------------------------------------------------------------------------

SUMMARY
=======

Upon booting your machine, EMM386 may display the following message:

   Size of Expanded memory pool adjusted

This message indicates that EMM386 has adjusted the amount of expanded memory it
will emulate from the machine's XMS memory.

The above message indicates one of two situations:

 - The amount of XMS memory specified by the RAM switch on the EMM386 device
   line is not a multiple of 16, so EMM386 adjusted the number to be a multiple
   of 16.

-or-

 - The amount of XMS memory specified by the RAM switch on the EMM386 device
   line is not available, so EMM386 adjusted the amount of XMS memory to reflect
   what is available.

MORE INFORMATION
================

When the RAM switch is included, EMM386 sets aside the indicated amount of XMS
memory and uses it to emulate expanded memory. The amount of XMS memory EMM386
sets aside is determined by the number (or lack thereof) placed before the RAM
switch in the EMM386 device line in the CONFIG.SYS file. This number should be
referred to in kilobytes (K). Because EMM386 sets aside memory in 16K blocks,
the number should also be referred to in multiples of 16. For example, the
following line sets aside 1024K (1 MB) of XMS memory to be emulated as
expanded:

   device=c:\dos\emm386.exe 1024 ram

Note: EMM386 will also set aside an additional 108K of memory above and beyond
the amount specified before the RAM switch. When specifying the RAM switch (or
with no switch at all), EMM386 creates a 64K page frame in the upper memory area
(UMA). The actual amount of extended memory used will be 64K plus overhead. The
overhead represents tables that EMM386 sets up to emulate expanded memory. The
size of these tables depends on the amount of expanded memory EMM386 has been
asked to emulate. An approximate range of the overhead memory is between 44K and
100K.

If no number is included before the RAM switch, EMM386 will by default emulate
256K of expanded memory.


Additional query words: 5.00

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS500
Version           : MS-DOS:5.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.