DOCUMENT:Q84297  17-DEC-2000  [msdos]
TITLE   :FORMAT Command Formats Current Drive in MS-DOS 1.x, 2.x
PRODUCT :Microsoft Disk Operating System
PROD/VER:MS-DOS:1.x,2.x,3.x,4.x,5.x,6.0,6.2,6.21,6.22
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system versions 1.x, 2.11, 3.1, 3.2, 3.21, 3.3, 3.3a, 4.0, 4.01, 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 
-------------------------------------------------------------------------------

SUMMARY
=======

In MS-DOS versions 1.x and 2.x, the FORMAT command formats the current drive
unless another drive is specified. For example, the command

   C:\dos>format

formats drive C.

MS-DOS versions 3.0 and later require that you specify the drive to be formatted
(for example, FORMAT C:); if no drive is specified, FORMAT displays the error:

   Required parameter missing

MORE INFORMATION
================

Also in versions 3.0 and later, FORMAT displays the message

   WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST!
   Proceed with Format (Y/N)?

when you issue the FORMAT command for a hard drive. To format the drive, press Y,
then press ENTER.

In MS-DOS versions 4.x, FORMAT requires that you enter the drive volume label
before it will format a hard disk. This protection feature was removed from
MS-DOS versions 5.0 and 5.0a.

Additional query words: 6.22 1.0 1.00 1.1 1.10 2.0 2.00 2.1 2.10 2.11 3.0 3.00 3.0a 3.00a 3.1 3.10 3.2 3.20 3.21 3.3 3.30 3.3a 3.30a 4.0 4.00 4.0a 4.00a 4.01 4.01a 5.00 5.00a 6.00 6.20

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS321 kbMSDOS400 kbMSDOS1xSearch kbMSDOS320 kbMSDOS330a kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS310 kbMSDOS500 kbMSDOS330 kbMSDOS401 kbMSDOS500a kbMSDOS211
Version           : MS-DOS:1.x,2.x,3.x,4.x,5.x,6.0,6.2,6.21,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.