DOCUMENT:Q95554 28-DEC-2001 [msdos] TITLE :Not Using the /P Switch with the SHELL Command PRODUCT :Microsoft Disk Operating System PROD/VER:MS-DOS:2.x,3.x,4.x,5.x,6.0,6.2,6.21,6.22; WINDOWS:95 OPER/SYS: KEYWORDS:kbenv msdos win95 win98 win98se ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft MS-DOS operating system versions 2.11, 3.1, 3.2, 3.21, 3.3, 3.3a, 4.0, 4.01, 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 - Microsoft Windows 95 - Microsoft Windows 98 - Microsoft Windows 98 Second Edition ------------------------------------------------------------------------------- SUMMARY ======= This article discusses the SHELL command's /P switch and covers the following information: - Effects of Not Using /P - Disabling AUTOEXEC.BAT by Removing /P - Background Information on SHELL and /P MORE INFORMATION ================ Effects of Not Using /P ----------------------- If you do not use the /P switch with the SHELL command in the CONFIG.SYS file, the following problems may occur: - The AUTOEXEC.BAT file is not processed. - The EXIT command is not disabled and causes the system to stop responding ("hang") in MS-DOS 2.x through 5.0. - In MS-DOS 6.0 and later the EXIT command causes the following error message: Bad or missing Command Interpreter Enter correct name of Command Interpreter (e.g., C:\COMMAND.COM) - SET, PATH, PROMPT, and other environment variable-related commands behave erratically. - A "Required parameter missing" message is displayed if the /MSG switch is in the SHELL command in CONFIG.SYS (MS-DOS 4.x and 5.0 only). - Other system instabilities appear. Microsoft does not recommend using SHELL without the /P switch to load COMMAND.COM. The following SHELL command demonstrates correct usage of the /P switch: shell=c:\command.com c:\ /p If you use the /K switch on the SHELL= line, you should also use the /P switch to prevent COMMAND.COM from being unloaded. Effects of Not Using /P with Windows 95: If you are using Windows 95 and you do not use the /P switch on the SHELL= line, Windows 95 boots only to a command prompt, with the error message "File creation error." You can start Windows 95 by typing "win" (without the quotation marks) after you receive the error message. Disabling AUTOEXEC.BAT by Removing /P ------------------------------------- When using some disk-compression configurations, you cannot always disable the AUTOEXEC.BAT file by renaming it. In such cases, you can cause MS-DOS to boot without processing AUTOEXEC.BAT by modifying the SHELL command in the CONFIG.SYS file. For example, change the line shell=c:\dos\command.com c:\dos /p /e:1024 -to- shell=c:\dos\command.com c:\dos NOTE: If you are using Stacker version 2.0 or later, see "Stacker 2.0 and /SYNC Switch" below. When Is Renaming the AUTOEXEC.BAT File Not Possible? Disk-compression utilities such as Stacker and SuperStor can be configured to create a compressed drive, which is then swapped with the actual drive C. In these cases, the AUTOEXEC.BAT file is not actually stored on drive C. Booting from a standard MS-DOS floppy disk allows access to the real hard disk, but not to the compressed drive. Booting from the hard disk while loading COMMAND.COM without the /P switch will disable AUTOEXEC.BAT processing so that you can boot from the hard disk and troubleshoot the AUTOEXEC.BAT file. If the CONFIG.SYS file includes a SHELL= command, remove the /P switch. If no editor is available, the command echo shell=c:\command.com c:\ >> config.sys appends the line shell=c:\command.com c:\ to the end of the CONFIG.SYS file, overriding any SHELL= commands elsewhere in the CONFIG.SYS file. Stacker 2.0 and /SYNC Switch Beginning with Stacker version 2.0, the drive-swapping utility SSWAP includes a /SYNC switch. The /SYNC switch causes SSWAP to attempt to synchronize the AUTOEXEC.BAT and CONFIG.SYS files on the real drive with those on the compressed drive. If you are using Stacker version 2.0, do the following: - Verify that the /SYNC switch is enabled in the CONFIG.SYS file - Make modifications to the AUTOEXEC.BAT file on the real drive (including renaming it if necessary) - Allow SSWAP to synchronize the changes between the drives. By default, it copies the file with the later date/time stamp over the earlier version of the file. Background Information on SHELL and /P -------------------------------------- The SHELL command tells the system what command interpreter to load during startup. (The term "shell" is taken from UNIX to describe the user's operating environment; it is not related to MS-DOS Shell.) The purpose of SHELL is to allow you to use an alternative to the MS-DOS default COMMAND.COM (for example, JP Software's 4DOS), or to tailor how COMMAND.COM loads. If no SHELL command exists, \COMMAND.COM /P is invoked on startup. The /P switch tells COMMAND.COM that this copy of COMMAND.COM is permanent; thus, EXIT is disabled and the environment space is initialized. Finally, if the AUTOEXEC.BAT file exists, it is processed; if not, COMMAND.COM executes TIME and DATE before presenting the drive C command prompt. Additional query words: 6.22 2.0 2.11 3.0 3.1 3.2 3.21 3.3 3.30a 4.0 4.01 4.01a 5.02.00 3.00 3.10 3.20 3.30 4.00 5.00 option parameter 6.00 6.20 win95x msdos ====================================================================== Keywords : kbenv msdos win95 win98 win98se Technology : kbWin95search kbWin98search kbWin98SEsearch kbZNotKeyword3 kbWin98 kbWin98SE kbMSDOSSearch kbMSDOS321 kbMSDOS400 kbMSDOS320 kbMSDOS330a kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS310 kbMSDOS500 kbMSDOS330 kbMSDOS401 kbMSDOS500a kbMSDOS211 Version : MS-DOS:2.x,3.x,4.x,5.x,6.0,6.2,6.21,6.22; WINDOWS:95 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.