DOCUMENT:Q96332  21-NOV-1999  [msdos]
TITLE   :F5 and F8 Keys Do Not Seem to Affect Startup Files
PRODUCT :Microsoft Disk Operating System
PROD/VER:MS-DOS:6.0,6.2,6.21,6.22
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system versions 6.0, 6.2, 6.21, 6.22 
-------------------------------------------------------------------------------

SUMMARY
=======

On some fast computers, the "Starting MS-DOS..." message may flash on the screen
too quickly to allow you to press the F5 or F8 function key.

If you have problems getting your computer to respond to the F5 and F8 function
keys, make sure the following lines are not in your CONFIG.SYS file:

   switches=/f     Skips the 2-second delay after displaying the
                   "Starting MS-DOS ..." message during startup.

   switches=/n     Prevents you from using the F5 or F8 key to bypass
                   startup commands.

NOTE: If you are using MS-DOS 6.2 and DoubleSpace, make sure the above lines are
not in your DBLSPACE.INI file. (DBLSPACE.INI is a hidden, system file located in
the root directory of your host drive.)

MORE INFORMATION
================

You can use a small multiple-configuration menu to determine if the F5 and F8
function keys are working properly. Adding the following five lines to the top
of your CONFIG.SYS file creates a startup menu that gives you one menu item. You
can then either press ENTER to start your computer, press the F5 function key to
bypass your configuration files, or press the F8 function key to step through
the CONFIG.SYS file.

   [COMMON]
   [MENU]
   MENUITEM=ONE,Your standard startup...
   MENUDEFAULT=ONE,15
   [ONE]

These statements give you 15 seconds before your CONFIG.SYS and AUTOEXEC.BAT
files are processed. They do not affect the contents of your CONFIG.SYS file.

Type "help multi-config" (without the quotation marks) at the MS-DOS command
prompt to learn more about using multiple-configuration menus.

Type "help switches" (without the quotation marks) to learn more about using the
Switches command.

Additional query words: 6.00 6.20 ctrl+f5 ctrl+f8

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600
Version           : MS-DOS:6.0,6.2,6.21,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.