DOCUMENT:Q74643  07-DEC-1999  [win95x]
TITLE   :Copying Soft Font Information from the NullPort in Windows
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:WINDOWS:3.0,3.0a
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows versions 3.0, 3.0a 
-------------------------------------------------------------------------------


SUMMARY
=======

If downloadable soft fonts for the HP LaserJet II and LaserJet II families of
printers have been installed for the printer driver configured for the Windows
nullport (typically designated as None), you cannot normally use the
Hewlett-Packard (HP) Softfont Installer dialog box to copy the soft font entries
to another port designation.

MORE INFORMATION
================

The HP Softfont Installer provides the option to copy soft font information only
between ports that are listed in the [ports] section of the WIN.INI file. The
nullport is not listed in this section.

If the font files are not from HP, you cannot use the Softfont Installer to
simply reinstall the fonts into the appropriate section of the WIN.INI file. The
HP Softfont Installer is designed to only create the correct PFM (printer font
metrics) files for HP Softfonts, and the PFM files created may not be compatible
with third-party downloadable fonts for the printers.

The following is an alternative that will work regardless of the source of the
font files.

If you have some soft font entries in the section of the WIN.INI file with the
following heading

   [HPPCL,LPT1]

and you want to copy the font entries that were installed in the WIN.INI section
with the following heading

   [HPPCL,None]

you cannot simply copy the font information from one section into the other
section because the number of soft fonts for that section will change and the
soft font numbering will have to change to reflect the change. This may mean
manually renumbering more than 200 lines in the WIN.INI file without making any
typographical errors.

Recommended Procedure
---------------------

1. With a text editor (NOTEPAD.EXE for example), edit the [ports] section of the
   WIN.INI file so that one of the lines in that section is:

   None=

   Simply replace one of the existing lines in the [ports] section that you are
   not currently using. Save the changes to the file and close it.

2. Open the Control Panel, select Printers, highlight the printer to which you
   want to copy the soft fonts, choose Configure, and then choose Setup.

3. Choose the Fonts button in the Printer Setup dialog box to bring up the HP
   Softfont Installer.

4. Choose the Copy Between Ports button and select the None port (this is
   possible because we have previously modified the [ports] section of the
   WIN.INI file). The soft font install program will scan for soft fonts and
   then list them on the right-hand side of the Softfont Installer dialog box.

5. Select all of the fonts that are listed on the right-hand side of the dialog
   box by positioning the cursor on one of the font names listed and then
   choosing the name while pressing CTRL+SHIFT.

6. With all the fonts selected, choose the Move button. This will move all of
   the font entries to the correct printer driver section of the WIN.INI file.

7. Exit the Control Panel in the normal fashion.

8. Edit the WIN.INI file again, removing the None= line from the [ports]
   section.


Additional query words: 3.00 3.0 3.0a 3.00a

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a
Version           : WINDOWS:3.0,3.0a

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.