PPT97: System Stops Responding Opening/Viewing File w/Graphics

ID: Q190387

The information in this article applies to:

SYMPTOMS

Your system may stop responding when you open or view a presentation containing imported graphics.

CAUSE

This behavior is caused by the expanded memory manager scanning too aggressively and setting up upper memory blocks (UMBs) that conflict with the video adapter.

RESOLUTION

To troubleshoot this problem, try the following:

1. Open your Config.sys file.

2. Locate the line similar to:

     device=emm386.exe noems

   Add the following to the end of this line:

     x=a000-c7ff

   This line should now be similar to:

     device=emm386.exe noems x=a000-c7ff

3. Save the file and restart your computer.

MORE INFORMATION

Windows 95 uses the MS-DOS expanded memory emulation driver, Emm386.exe, to provide expanded memory services (EMS) for MS-DOS applications that need it. If you load Emm386.exe with an x=<range> parameter, Windows 95 doesn't try to put an EMS pageframe in that range of memory addresses.

A standard VGA card requires memory ranges A000-AFFF and B800-BFFF. Some VESA Local Bus and PCI cards use the entire range A000-C7FF.

Additional query words: ppt97 multi media diamond ati mach vram multimedia w_powerpt hang freeze lock up

Keywords          : kberrmsg kbgraphic
Version           : WINDOWS:97
Platform          : WINDOWS
Hardware          : x86
Issue type        : kbprb

Last Reviewed: November 20, 1998