WD97: How to Use STYLEREF Field to Place Chapter Info in Header

ID: Q198371

The information in this article applies to:

SUMMARY

This article describes how to use the STYLEREF field. The STYLEREF field can be used to create dictionary-style entries at the top of each page or to place the chapter title in the heading. This field is useful when you want text in the header to match what is typed on the page.

MORE INFORMATION

The STYLEREF field is a specialized reference field designed to let you automatically add information to a document, especially in the header or footer.

The STYLEREF field consists of the field, the name of the style assigned to the text to be returned as the result of the field, and field switches.

   {STYLEREF "StyleName" \* MERGEFORMAT}
   {STYLEREF "StyleName" <switches> \* MERGEFORMAT}

   NOTE: The name of the style must be enclosed in quotation marks
   to work properly.

Word searches the page from top to bottom (by default) for the nearest paragraph formatted with the style specified in the STYLEREF field. Word then returns that text formatted with the designated style in the location of the field.

STYLEREF Field Switches

 \l - Inserts the last text formatted with the style on the current page
      instead of the first text formatted with this style. Word searches
      the page from bottom to top.

      The \l switch only works correctly in headers and footers.

 \n - Causes the field to display the entire paragraph number for a
      referenced paragraph without trailing periods. No information about
      prior levels is displayed unless it is included as part of the
      current level. For example, caption numbering is included if caption
      numbering has been applied to the paragraph.

 \p - Causes the field to display its position relative to the source
      bookmark using the word "above" or "below". If the STYLEREF field
      appears in the document before the bookmark, it evaluates to "below".
      If the STYLEREF field appears after the bookmark, it evaluates to
      "above". If the STYLEREF field appears within the bookmark, an error
      is returned.

 \r - Inserts the entire paragraph number of the bookmarked paragraph in
      relative context, or relative to the paragraph numbering scheme,
      without trailing periods.

 \t - When used with the \n, \r, or \w switch, causes the STYLEREF field to
      suppress nondelimiter, or nonnumerical, text. With this switch, for
      example, you can reference "Section 1.01", and only "1.01" is
      displayed in the result.

 \w - Inserts the paragraph number of the bookmarked paragraph in full
      context, from anywhere in the document. For example, when referencing
      paragraph "ii.", a STYLEREF field with the \w switch returns
      "1.a.ii" as a result.

The STYLEREF field is most often used in headers and footers. The examples in the "Examples" section of this article illustrate the possible uses of the STYLEREF field.

How to Insert a STYLEREF Field

Method 1: To Create a Field Using the Menus

1. Position the insertion point in the document where you want to insert

   the text to be entered.

2. On the Insert menu, click Field.

3. In the Categories list box, select Links And References.

4. In the Field Names list, select StyleRef.

5. Click Options and then click the Styles tab. Select the style defined by

   your text that you want to be displayed as the field result, and then
   click Add to Field.

6. Type quotation marks around the style name.

7. If you want a field switch, click the Field Specific Switches tab.

   Select the switch you want, click Add To Field, and then click OK.

8. Click OK.

To view the field code you just inserted, press ALT+F9 (Windows) or OPTION+F9 (Macintosh).

Method 2: To Create a Field Using Keystrokes

1. Position the insertion point in the document where you want to insert

   the text.

2. Press CTRL+F9 (Windows) or COMMAND+F9 (Macintosh).

   Field code brackets, {}, appear in the document.

3. Type the following inside the field code brackets, where <stylename> is
   the name of the style applied to the text that you want to be displayed:

                STYLEREF "<stylename>"

   NOTE: You must enclose the style name in quotation marks.

EXAMPLES

Using STYLEREF Fields to Create a Dictionary Type Entry

NOTE: This example only works if the field indicated below is in either the header or the footer of the document.

Use the STYLEREF field when you want to create the same format you find in a dictionary at the top of the page, for example, BEGINNING WORD--LAST WORD.

For example, if you have the word Apple at the top of your document and the word Baseball at the bottom of the document and they are both formatted with a Heading 2 style, you can enter fields into the header and/or footer to give a result of:

   Apple--Baseball

To produce this effect, follow these steps:

1. In the header or footer of the document, enter the following fields by

   doing these steps:

   a. On the View menu, click Header and Footer.

   b. Press CTRL+F9 (Windows) or COMMAND+F9 (Macintosh) to enter the first
      set of field code braces {}.

2. Type STYLEREF "Heading 2" into the field braces.

3. Move the insertion point outside the right field brace and press the

   hyphen key twice. Then press CTRL+F9 (Windows) or COMMAND+F9
   (Macintosh) to enter the second set of field code braces {}.

4. Type STYLEREF "Heading 2" \l into the field braces.

The final entry should resemble the following:

      {STYLEREF "Heading 2"}--{STYLEREF "Heading 2" \l}

The result of these fields will be:

      Apple - Baseball (where Apple and Baseball have been formatted with
                        Heading 2 style)

Chapter Title to Appear in the Header

Use this format to insert the current chapter name as part of the header or footer.

If the title of the current chapter is File Management and that title is formatted with a Heading 1 style and if you place the field below into the header

      {STYLEREF "Heading 1"}

the result of the field in the header will be:

      File Management

EFFECTIVE USE OF THE STYLEREF FIELD

To use the STYLEREF field effectively, you need to understand how Word determines which paragraph is the nearest one. That determination depends on where the STYLEREF field is and on whether the /l (the letter L) switch is being used.

   If STYLEREF
   Is here            Word searches here
   -----------------------------------------------------------------------

   Document text      The closest text preceding the STYLEREF field. If the
                      style isn't found, Word searches for the closest
                      following text.

   Footnotes,         The closest text preceding the footnote, annotation,
   annotations,       or endnote reference mark in the document text.
   and endnotes       If the style isn't found, Word searches for the
                      closest text following the reference mark.

   Headers and        The current page, from top to bottom. If the style
   Footers            isn't found, Word searches next from the top of the
   (during printing)  page to the beginning of the document, and then from
                      the bottom of the page to the end of the document.
                      If the \l switch is used, Word searches from the
                      bottom of the page to the beginning or end of the
                      document.

   Headers and        The section that contains the STYLEREF field, from
   Footers            the beginning. If the style isn't found, Word
   (when not          searches from the end of the section to the end of
   printing)          the document.

For more information about the STYLEREF field in tables, click the Office Assistant, type "styleref", click Search, and then click "Field codes: StyleRef field".

NOTE: If the Assistant is hidden, click the Office Assistant button on the Standard toolbar. If Word Help is not installed on your computer, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q120802
   TITLE     : Office: How to Add/Remove a Single Office
               Program or Component

For additional information about this situation in earlier versions of Word, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q141994
   TITLE     : How to Use the STYLEREF in Microsoft Word

Keywords          : word97 
Version           : WINDOWS:97
Platform          : WINDOWS
Issue type        : kbhowto

Last Reviewed: February 12, 1999