DNS Settings Not Saved If DUN Installed During Batch Setup

ID: Q192117

The information in this article applies to:

SYMPTOMS

During an automated (or batch) installation of Windows 98, Domain Name Service (DNS) settings for the Microsoft TCP/IP protocol may not be added to the Windows 98 configuration, even though the correct DNS settings are specified in the [MSTCP] section of the batch (.inf) file.


CAUSE

This behavior can occur if Dial-Up Networking is selected as an optional component to be installed during the automated installation. If Dial-Up Networking is installed during an automated installation, any DNS settings specified in the batch .inf file are not saved to the Windows configuration.


RESOLUTION

A supported fix that corrects this problem is now available from Microsoft, but has not been fully regression tested and should be applied only to computers experiencing this specific problem. To resolve this problem immediately, contact Microsoft Technical Support to obtain the fix. If you are not severely impacted by this specific problem, Microsoft recommends that you wait for the next service pack that contains this fix.

For a complete list of Microsoft Technical Support phone numbers and information on support costs, please go to the following address on the World Wide Web:

http://support.microsoft.com/support/supportnet/default.asp


This fix should have the following file attributes (or later): 


   File name  Version    Date     Time    Size
   ---------------------------------------------------
   Mstcp.dll  4.10.2012  6/23/98  9:26am  39,280 bytes


NOTE: If you contact Microsoft to obtain this fix, a fee may be charged. This fee is refundable if it is determined that you only require the fix you requested. However, this fee is non-refundable if you request additional technical support, if your no-charge technical support period has expired, or if you are not eligible for standard no-charge technical support.

For more information about eligibility for no-charge technical support, see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q154871
TITLE: Determining If Your Product Is Eligible for No-Charge Technical Support


STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows 98.


Keywords          : kbenv kbsetup winbatch win98 
Version           : WINDOWS:
Platform          : WINDOWS 
Issue type        : kbprb

Last Reviewed: January 27, 1999