DOCUMENT:Q133105 02-NOV-1999 [fortran] TITLE :FORTRAN PowerStation 32 README.TXT: Miscellaneous PRODUCT :Microsoft Fortran Compiler PROD/VER::1.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Fortran Powerstation 32 for Windows NT, version 1.0 ------------------------------------------------------------------------------- SUMMARY ======= The following information is from the Microsoft FORTRAN PowerStation 32 README.TXT file located in the \FPSNT\README directory. This file has four parts: Part Contents ---- -------- 1 Installation 2 Debugging 3 Building and Running Programs 4 Miscellaneous MORE INFORMATION ================ =======================< Part 4: Miscellaneous >======================== Floating-Point Precision: FP10.OBJ ---------------------------------- The run-time libraries set the default internal precision of the chip (or emulator) to 64 bits. Note that this does not apply to the size of arguments, return values, or variables; it only applies to the internal precision at which all intermediate calculations are performed. You can override this default and set the chip (or emulator) back to full 80-bit, 10-byte precision by linking in the FP10.OBJ file, installed by Setup in your Fortran PowerStation LIB directory. If you are building your application in the Visual Workbench, do the following: 1. From the Options menu, choose Project. The Project Options dialog box appears. 2. Choose Linker. The Linker Options dialog box appears. 3. In the Category box, select Input. 4. Type FP10.OBJ in the Object/Library Modules box. 5. Choose OK. The Project Options dialog box reappears. 6. Choose OK. If you are running the linker from the command line, FP10.OBJ must appear on the linker command line before any library files (.LIB). Notes on Using NAMELIST Statement --------------------------------- A value-assignment pair consists of a variable name, array element, or substring followed by an equal sign and one or more values or value separators. The equal sign can be preceded or followed by any number of blanks, or by no blanks at all. A value separator is a single comma or one or more blanks. Tabs are valid as white-space separators. Using Assumed-Size Arrays of Structures --------------------------------------- Writing an assumed-size array without specifying element indexes should produce an error, but does not if the array is an array of structures. subroutine sub(s) structure /struc/ real r end structure record /struc/ s(*) C The following line is incorrect, but will not produce an error: write(*,*) s(i).r C Instead, a write statement such as the following should be used: write(*,*) (s(i).r, i=1,10) Reading Index before Structure Array Element -------------------------------------------- The FORTRAN standard (p12-15) states that READ statements of the form READ (unit) N, A(N) are valid, and that the value READ for N is transferred to N before A(N) is read. This works fine for a standard array, but not when the array is a structure element, as the following example illustrates: STRUCTURE /struc/ INTEGER*2 arr(5) END STRUCTURE RECORD /struc/ st INTEGER*2 arr(5) OPEN(1,FILE='test.dat') DO WHILE (.not.eof(1)) READ(1,*) j,arr(j) ! The value of 'j' does transfer to ! 'arr' correctly. ENDDO WRITE(*,*) 'Non-structure array' DO j=1,5 WRITE(*,*) j,arr(j) ENDDO REWIND(1) DO WHILE (.not.eof(1)) READ(1,*) j,st.arr(j) ! The value of 'j' does not transfer ! to 'st.arr' correctly. ENDDO WRITE(*,'(/1x,a)') 'Structure array' DO j=1,5 WRITE(*,*) j,st.arr(j) ENDDO END The output from this program is: Non-structure array 1 1 2 2 3 3 4 4 5 5 Structure array 1 2 2 3 3 4 4 5 5 0 Command Line Access to Help Files --------------------------------- You can open and search the FORTRAN Visual Workbench help files from the console command line by using the "fhelp" command: Usage: fhelp [Error | Language | Compile | LInk] Note that you can abbreviate categories by specifying at least the capital letters shown. Examples: "fhelp error lnk1104" provides information on LINK error 1104 "fhelp lang record" provides information on the RECORD statement "fhelp comp /Ox" provides information on the /Ox compiler switch The fhelp command runs WinHelp to display the requested information from the appropriate help file. If the search-string is not found, a selection box is presented to further narrow the search. Note that the search-string is optional; if it is not present, fhelp will provide a table of contents for the selected help file. Using Extended Characters in Console Applications ------------------------------------------------- Because FORTRAN Visual Workbench runs in Microsoft Windows NT and produces console applications that run in an emulation of MS-DOS, two distinct character sets are used: ANSI and OEM. The ANSI set is normally used in Windows; the OEM set is used in MS-DOS. Both character sets contain extended characters (such as accented letters and line-drawing symbols), but the numerical representation of these characters is different. Windows NT provides a special font called TERNIMAL that uses the OEM character set. If you use extended characters in your files, you need to know about both character sets. FORTRAN Visual Workbench is an ANSI editor; it does not convert characters to the OEM character set. If you want to see the true OEM characters, use the TERMINAL font. If you want to enter OEM characters, add a zero to the beginning of the character code. (For example, 'ALT + 0130' will produce an accented 'e'; typing 'ALT + 130' will produce the ANSI character.) No translation is performed when files are loaded or saved. The editor displays the character representation of what was in the file. When a character is entered, it is translated to ANSI and saved as that value. This applies for all characters on the keyboard, including an e-accent on an international keyboard and an ALT+number entered from the numeric key pad. The only time a translation is not done is when an ALT+0+number is entered. When looking at a file from the command console, you will get the OEM representation of the characters. We recommend that you do not use extended characters in filenames. Wrong Example Code in Reference Manual for CYCLE ------------------------------------------------ The CYCLE statement's example in the Reference Manual is incorrect. Help contains the correct program as CYCLE.FOR. Additional query words: 1.00 ====================================================================== Keywords : Technology : kbAudDeveloper kbFortranSearch kbZNotKeyword2 kbFORTRANPower32100NT Version : :1.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.