DOCUMENT:Q131473  15-FEB-2000  [foxpro]
TITLE   :How to Load the Class Browser into Memory on Startup
PRODUCT :Microsoft FoxPro
PROD/VER:WINDOWS:3.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Visual FoxPro for Windows, version 3.0 
-------------------------------------------------------------------------------

SUMMARY
=======

This article describes how to add the Class Browser item to the System Menu
during Startup and, if desired, also load it into memory at startup.

MORE INFORMATION
================

If you create your own startup routine, you might want to add the following code
to it to be sure the default system menu has the Class Browser item.

Calling the Class Browser (BROWSER.APP) with a zero (0) numeric parameter doesn't
load the Class Browser, but it does ensure that the Class Browser menu item
appears in the Tools menu.

Calling the Class Browser (BROWSER.APP) with a one (1) numeric parameter, adds
the menu item and loads the Class Browser into memory. The benefit is that the
OLE container support files (outline, OCX files, and so on) are loaded into
Windows memory. This is useful if you prefer to place the first- time OLE load
delay at start-up rather than when you run/edit a form with an OCX Control.

Step-by-Step Procedure
----------------------

1. Open the VFPSTART.PRG file:
   a. To do this from the MENU:

      1. From the File menu, choose Open.

      2. Change the Files of type to Program.

      3. Select VFPSTART.PRG, and choose OK.

   b. To do this from the Command window, issue the following command to bring
      up the Modify Program window:

         Modify Command VFPSTART.PRG

2. Enter or modify the following source code:

   a. Check to see if you have a line in your VFPSTART.PRG file that looks like
      the following line. If you don't find it, add it.

         DO (HOME()+'BROWSER.APP') WITH 0 &&Adds Class Browser To Menu

   b. If you want the Class Browser to load into memory when at startup, change
      the 0 parameter to 1 as done here:

         DO (HOME()+'BROWSER.APP') WITH 1 && Adds Class Browser To Menu and
                                          && Loads Class Browser into memory

3. Save the Program.

4. Exit and restart Visual FoxPro to make these changes take effect.

Additional query words: VFoxWin

======================================================================
Keywords          :  
Technology        : kbVFPsearch kbAudDeveloper kbVFP300
Version           : WINDOWS:3.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.