DOCUMENT:Q143399  08-FEB-2000  [foxpro]
TITLE   :PRB: AccessPC with Speed Copy Causes DBC and Project Problems
PRODUCT :Microsoft FoxPro
PROD/VER:MACINTOSH:3.0b
OPER/SYS:
KEYWORDS:kbenv

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Visual FoxPro for Macintosh, version 3.0b 
-------------------------------------------------------------------------------

SYMPTOMS
========

WARNING: The information in this article has not been confirmed or tested by
Microsoft. Some or all of the information in this article has been taken from
unconfirmed customer reports. ANY USE BY YOU OF THE INFORMATION PROVIDED IN THIS
ARTICLE IS AT YOUR OWN RISK. Microsoft provides this information "as is" without
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties of merchantability and/or fitness for a particular
purpose.

Importing Visual FoxPro for Windows .dbc files into Visual FoxPro for Macintosh
with AccessPC and Speed Copy loaded causes file corruption or the inability to
modify or update data once the .dbc files are opened in Visual FoxPro for
Macintosh.

CAUSE
=====

There is an Init conflict between AccessPC 1.1 and Speed Copy.

RESOLUTION
==========

Extension conflicts with Visual FoxPro can cause a variety of problems. To avoid
these conflicts, follow one of the procedures below to turn off Inits:

If you are using System 7.5x
----------------------------

1. From the Apple menu, choose Control Panels, and then choose Extensions
   Manager.

2. In the Sets box, select the All Off option.

Note that in System 7.5, you may still experience problems if you attempt to turn
off extensions by holding down the SHIFT key when you restart your computer.

If you are using a System earlier than System 7.5
-------------------------------------------------

1. Switch to the Finder.

2. Hold down the SHIFT key and choose Restart from the Special menu.

3. Continue holding the SHIFT key down until a dialog box appears with the
   message:

   "Welcome to Macintosh."
   "Extensions Off"

Try to recopy the Visual FoxPro for Windows DBC to the Macintosh. Start Visual
FoxPro for Macintosh and attempt to modify the data.

STATUS
======

Microsoft is researching this behavior and will post new information here in the
Microsoft Knowledge Base as it becomes available.

MORE INFORMATION
================

The conflict appears to be between AccessPC 1.1 and Speed Copy. AccessPC is used
to read MS-DOS formatted disks. If the Macintosh System 7.5 utility that reads
MS-DOS disks, PC Exchange, is used with Speed Copy, the import appears to go
without a problem.

Additional query words: VFoxMac unconfirmed

======================================================================
Keywords          : kbenv 
Technology        : kbHWMAC kbOSMAC kbVFPsearch kbAudDeveloper kbVFP300bMac
Version           : MACINTOSH:3.0b

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.