FP1: "Could Not Get socket" Error Starting FrontPage

Last reviewed: March 17, 1998
Article ID: Q145860
The information in this article applies to:
  • Microsoft FrontPage for Windows, version 1.0

SYMPTOMS

When you start the FrontPage Personal Web Server, you get the following error message:

   Could not get socket.

CAUSE

The FrontPage Personal Web Server cannot identify a valid TCP/IP stack. The socket is a combination of an IP address and a port that identifies your TCP/IP address. This error occurs when the TCP/IP stack is not installed. Port numbers are a function of the TCP protocol and are used to identify the different services available on a computer.

RESOLUTION

Install Microsoft's TCP/IP for Windows 95 or Windows for Workgroups. If you are using Windows 3.1, install Trumpet Winsock. Trumpet Winsock is available as shareware on the Internet.

For additional information, please see the following articles in the Microsoft Knowledge Base:

   ARTICLE-ID: Q138789
   TITLE     : How to Connect to the Internet in Windows 95

   ARTICLE-ID: Q111682
   TITLE     : WFWG 3.11: How to Obtain Microsoft DLC and Microsoft TCP/IP

   ARTICLE-ID: Q93736
   TITLE     : Enabling the Microsoft TCP/IP Protocol with WFWG 3.1

NOTE: Do not overwrite your original Winsock.dll file. If this file is located in the Windows or Windows\System folder (subdirectory), move or copy it to another folder (directory) before you install the TCP/IP stack. If this file is in the folder for your online service, you can leave it there.

MORE INFORMATION

If you run the FrontPage TCP_IP Test, the results indicate that the 32- Bit and 16-bit Winsocks are OK, but all other tests fail. This indicates that you have an online service or Internet connection which uses Winsock.dll to make a dial-up connection to the Internet. Winsock.dll is not a TCP/IP stack; it provides a transport independent interface for applications.

Sometimes when you run the TCP_IP Test, your modem automatically dials into your Internet service. In this case, you will have access to TCP/IP and the TCP/IP tests pass. But, if you disconnect from the service, the tests for IP Address, Host Name, Localhost, and 127.0.0.1 will fail.


Additional query words: 1.00 1.00a front page personal web server pws
vermeer tcp_ip tcp/ip fails failed fail failing doesn't pass windsock
Winsock.dll 16-bit 16 bit 32-bit 32 bit
Keywords : kbusage kbdta
Version : windows:1.0,1.0a
Platform : WINDOWS
Hardware : x86
Issue type : kbprb


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 17, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.