DOCUMENT:Q85608 05-NOV-1999 [pcmail] TITLE :FAX: Typical Support Issues PRODUCT :Microsoft Mail For PC Networks PROD/VER:MS-DOS:3.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Mail Gateway to Fax, version 3.0 ------------------------------------------------------------------------------- SUMMARY ======= This article lists common problems you may encounter while installing the Microsoft Mail Gateway to Fax. 1. Installing the fax board. The fax board must be installed as indicated in the Microsoft Mail Gateway to Fax "Administrator's Guide." The most common problem encountered with the fax board is the board conflicting with another piece of hardware in the gateway machine. To avoid this problem, check the I/O addresses of the existing hardware in the gateway computer, and make sure the fax board does not conflict with any of these addresses. 2. Configuring the fax board software. The fax board software must be configured as indicated in the Microsoft Mail Gateway to Fax "Administrator's Guide." For example, the Intel SatisFAXtion software must be installed on the postoffice, and certain files must be copied to the gateway machine. If this is not done, the gateway will not work correctly. 3. Incorrect file types. The only allowable file types are black and white DCX and PCX files, and ASCII text files. 4. Microsoft Mail version 2.1a PROFILE.GLB file format. Because the version 2.1a profile file does not have its own editor, editing the PROFILE.GLB file can cause problems. Do not delete semicolons or comments from the file. The Printer path and Logo file parameters should be terminated with a backslash (\). If you encounter major problems, copy the original PROFILE.GLB from the install disks and modify it again. 5. Microsoft Mail version 3.0 PROFILE.GLB file format. In version 3.0 of the gateway, the Printer path and Logo file parameters do not need to be terminated with a backslash (\). You can edit the file using the PROFILE.EXE program; therefore, it should be relatively easy to modify. 6. Printer path. Entering the wrong parameters in the profile file can cause problems. Printer path is one of the more confusing parameters--it looks for a file called PPB.EXE, which should be in the mail executables directory. The path entered in this field should point to that file. 7. Logo file. This path should point to the logo file being used. This field cannot be left blank. 8. Unable to spool incoming faxes to printer. Before the fax gateway can spool items to the printer, the DISPLAY.EXE program must be run to create a printer driver. DISPLAY.EXE must be run from the same directory the fax gateway is run from. Additional query words: 3.00 pcmail satisfaxion ====================================================================== Keywords : Technology : kbMailSearch kbMailGateSearch kbZNotKeyword3 kbMailGateFax300 Version : MS-DOS:3.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.