DOCUMENT:Q96003  05-NOV-1999  [pcmail]
TITLE   :PC DirSync: Error and Status Msgs #60 - 118
PRODUCT :Microsoft Mail For PC Networks
PROD/VER:WINDOWS:3.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Mail for PC Networks, version 3.0 
-------------------------------------------------------------------------------

SUMMARY
=======

DIRECTORY SYNCHRONIZATION ERROR AND STATUS MESSAGES #60 - 118
-------------------------------------------------------------

On Microsoft Mail for PC Networks version 3.0 Server Disk 1, there is a file
called DIRSYNC.TXT that contains the error codes used in directory
synchronization (Dir-Sync) and in the IMPORT utility for Mail. The errors are
logged in the DIRSYNC.LOG file.

   [60] Using direct routing for autocreated postoffice

   This is an information message. Because the Import utility is running from
   the directory server postoffice, the routing for the new postoffice will be
   direct via an MS-DOS drive. On any other postoffice, the autocreate feature
   creates a new postoffice that has the same routing that the current
   postoffice uses to reach the directory server postoffice.

   [61] No template information defined for postoffice

   The postoffice for which you are extracting addresses does not have any
   template information. To get the template information, run the Administrator
   program, set Config Dir-Sync Requestor Options Templates Receive to Yes and
   then submit an Import request to the directory server postoffice by selecting
   Config Dir-Sync Requestor Import. Or you can get the template information
   from the administrator of the external postoffice, manually insert it into
   the import file and then run Import to insert the information into your
   postoffice's data files.

   [62] Replace option failed

   Try the operation again. Then check that there is still a connection to the
   server and ensure that there is enough disk space to perform the operation.
   If the problem continues, one of the data files may be locked open. Contact
   your network vendor to determine how to find and close locked files.

   [63] Resync extract failed

   Try the operation again. Then check that there is still a connection to the
   server. If the problem continues, one of the data files may be locked open.
   Contact your network vendor to determine how to find and close locked files.

   [64] Reserved network name

   The network name of the postoffice you tried to create with Import's -C
   autocreate option or with the Administrator program requestor Create-PO
   option is a reserved name. Select another network name.

   [65] No template defined for postoffice

   You are trying to import users with template information to a postoffice that
   has no template defined.

   [66] Local postoffice transaction ignored

   The Import utility does create local users. Use the Administrator program
   Local-Admin commands to define users at your local postoffice. All lines in
   the import file that contain transactions for local users will be ignored.

   [67] Resync extract can be performed only at a Directory Synchronization
   Server

   You can run the Import utility with the -s and -st options at the directory
   server postoffice only.

   [68] Network name already in use

   The network name of the postoffice you tried to create with the -C autocreate
   option already exists. Select another network name.

   [69] Alphanumeric characters only allowed in network name

   Only letters and numbers are allowed in network names.

   [70] Alphanumeric characters only allowed in postoffice name

   Only letters and numbers are allowed in postoffice names.

   [71] Alphanumeric characters only allowed in mailbox name

   Only letters and numbers are allowed in mailbox names.

   [72] Fullname is too long

   Check the import file for at least one alias (fullname) that exceeds 30
   characters.

   [73] Template option not set, template information will be ignored

   The Import utility cannot import template information. Ensure that the
   Dir-Sync Requestor Options Templates Receive command in the Administrator
   program is set to Yes, or if you use Import as a stand-alone utility, run the
   utility with the -T command line option.

   [74] FAX recipient address field too long

   Check the import file for fax addresses that are too long. The maximum length
   of the recipient field in a fax address is 30 characters. The four fax
   address fields must be in the following order: recipient, location, company,
   and phone number. The fields are separated by tildes (~).

   [75] FAX location address field too long

   Check the import file for fax addresses that are too long. The maximum length
   of the location field in a fax address is 30 characters. The four fax address
   fields must be in the following order: recipient, location, company, and
   phone number. The fields are separated by tildes (~).

   [76] FAX company address field too long

   Check the import file for fax addresses that are too long. The maximum length
   of the company field in a fax address is 30 characters. The four fax address
   fields must be in the following order: recipient, location, company, and
   phone number. The fields are separated by tildes (~).

   [77] FAX phone number address field too long

   Check the import file for fax addresses that are too long. The maximum length
   of the phone number field in a fax address is 22 characters. The four fax
   address fields must be in the following order: recipient, location, company,
   and phone number. The fields are separated by tildes (~).

   [78] Out of file handles

   Ensure that the CONFIG.SYS file has FILES=20 (minimum). If the error
   continues, increase this number.

   [79] Out of disk

   There is not enough disk space to run the program. Increase the available
   disk space before continuing.

   [80] Out of memory

   Ensure that you are running the program on a computer with at least 640K of
   memory.

   [81] No mailbox name

   Ensure the *.XTN files exist, are correct, and are not corrupt.

   [82] Local user information not allowed for this address type

   Check the import file to ensure local user profile information does not exist
   for an externally defined user.

   [83] Invalid local user token value:

   [84] Invalid local user token:

   [85] Unable to create local user:

   [86] Unable to delete local user:

   [87] Maximum number of local users has been reached

   [88] Invalid token assignment:

   [89] Truncating password to 8 characters:

   [90] Transaction not processed

   [91] The mail database is locked by another process:

   Check to make sure the FLAG.GLB file is not locked open.

   [92] Can't modify local user to external:

   [93] ACCESS tokens ignored for admin user:

   [100] Coding is incomplete

   [101] Begin execution

   [102] End process

   [103] Could not parse value

   [104] Requestor process failed

   [105] ReqRx received n updates

   [106] ReqTx send n updates

   [107] No more records

   [108] Error getting next record

   [109] Error getting first record

   [110] Failed to read the last transaction

   Wait at least one synchronization cycle and try the operation again. If the
   problem continues, copy a backup of the MSTTRANS.GLB file. Then ask all
   requestors to export their address lists.

   [113] Failure to send mail to

   Ensure that there is still a connection to the server. Also ensure that there
   is sufficient disk space to receive the mail. Wait at least one directory
   synchronization cycle and try the operation again. If the problem continues,
   contact Microsoft Product Support Services.

   [114] Failure to delete a message

   Ensure that there is still a connection to the server and try the operation
   again. If the problem continues, contact Microsoft Product Support Services.

   [115] Failure to read mail from

   Ensure that the computer running the Dispatch program has 640K of memory and
   that FILES=20 (minimum) in the CONFIG.SYS file. If the problem continues,
   contact Microsoft Product Support Services.

   [116] Attachment is missing or is empty

   Check that the foreign requestor did not forget to send an attachment with
   the system message. If the requestor did send the attachment, wait at least
   one synchronization cycle as the problem will most likely clear up on its
   own.

   [118] Transaction limit reached

   See message 166.

Additional query words: 3.00

======================================================================
Keywords          :  
Technology        : kbMailSearch kbZNotKeyword3 kbMailPCN300
Version           : WINDOWS:3.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.