DOCUMENT:Q140073  23-JAN-2000  [pcmail]
TITLE   :PC NTMMTA: Err Msg: Failure to Initialize Modem Session
PRODUCT :Microsoft Mail For PC Networks
PROD/VER::3.5
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Mail Multitasking MTA for Windows NT, version 3.5 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you run an asynchronous instance of the Multitasking MTA for Windows NT (NT
MMTA) with a U.S. Robotics modem, the following error may appear on the Monitor
screen and in the log files:

   Failure to initialize modem session.

CAUSE
=====

This is caused by the modem not resetting properly after a remote user or
another postoffice Mail External program (EXTERNAL.EXE) connects and disconnects
properly when you use the USUSRHS script from a command line or as a Microsoft
Windows NT service.

NOTE: The USUSRHS script is not properly resetting the modem.

RESOLUTION
==========

Get the USUSR5.EXE file from CompuServe in the Remote/Modems library of the
Microsoft Workgroup Applications forum (GO MSWGA).

USUSR5.EXE is a self-extracting archive containing the following files:

 - USUSRHS.SCR: The replacement file (version 1.4). This file will also work
   with the Mail External program (EXTERNAL.EXE) and Microsoft Mail Remote for
   Windows.

 - USUSRHS.MDM: The source file for USUSRHS.SCR. Use SCRCOMP.EXE to compile into
   the .SCR or script file format.

 - README.TXT: The document containing instructions for performing the upgrade.

NOTE: The DIP switches on the modem must be set to factory defaults. Auto-answer
must be set off. For the Sportster 14.4 and 28.8, this means DIP# 3,5,8 are
down, and all other switches are up. For External modems, in order for this
script to work properly, the machine that the modem is running on MUST have a
16550AF UART. The effective performance of this script may be affected by modem
ROM and Flash ROM bios upgrades.

MORE INFORMATION
================

In this situation, the first session appears to run properly. The remote user or
postoffice connects, sends/receives mail, disconnects without error on their
end. However, the U.S. Robotics modem on the NT MMTA side does not reset
properly.

If the -Q2 command line switch or DebugXCSI EXTERNAL.INI entry is used, question
marks will appear next to the IN and OUT entries on the Monitor screen and in
the SESSION.LOG while the NT MMTA is trying to reset the modem.

For additional information, please see the following article in the Microsoft
Knowledge Base:

   Q132746 External Will Not Answer with USR Sportster Modem v.34

   Q92438 External Mail Program's -Qx Option

   Q139368 PC NTMMTA: SESSION.LOG Displays Pulse as Baud Rate


Additional query words: 3.50 async usr courier dual standard

======================================================================
Keywords          :  
Technology        : kbZNotKeyword2 kbMailSearch kbZNotKeyword3 kbMailMMTA350NT
Version           : :3.5

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.