WX1234: Setup and Conversion Questions and Answers (7.0)

Last reviewed: October 21, 1997
Article ID: Q137346
The information in this article applies to:
  • Microsoft Access version 7.0

Novice: Requires knowledge of the user interface on single-user computers.

The "Setup and Conversion Questions and Answers" (WX1234) Application Note contains questions and answers about setup and conversion issues in Microsoft Access for Windows 95 version 7.0.

You can obtain this Application Note from the following sources:

  • Microsoft FastTips Technical Library
  • Microsoft Product Support Services

For complete information, see the "To Obtain This Application Note" section at the end of this article.

THE TEXT OF WX1220

  Microsoft(R) Product Support Services Application Note (Text File)
          WX1234: SETUP AND CONVERSION QUESTIONS AND ANSWERS
                                                   Revision Date: 9/95
                                                      No Disk Included

The following information applies to Microsoft Access, version 7.0.

 INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY
 ACCOMPANY THIS DOCUMENT (collectively referred to as an Application
 Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
 EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
 WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
 PURPOSE. The user assumes the entire risk as to the accuracy and
 the use of this Application Note. This Application Note may be
 copied and distributed subject to the following conditions:  1) All
 text must be copied without modification and all pages must be
 included;  2) If software is included, all files on the disk(s)
 must be copied without modification (the MS-DOS(R)  utility
 diskcopy is appropriate for this purpose);  3) All components of
 this Application Note must be distributed together;  and  4) This
 Application Note may not be distributed for profit.

 Copyright (C) 1995 Microsoft Corporation.  All Rights Reserved.
 Microsoft, MS-DOS, Visual Basic, and Windows are registered
 trademarks and Windows NT is a trademark of Microsoft Corporation.
 Paradox is a registered trademark of Borland International, Inc.
 Lotus is a registered trademark of Lotus Development Corporation.
1. Q. Can I run Microsoft Access for Windows 95 in other versions of
      Windows?

   A. You can run Microsoft Access for Windows 95 in Microsoft
      Windows 95 or in Microsoft Windows NT(TM) version 3.51 or
      later. Microsoft Access for Windows 95 does not run in earlier
      versions of Windows.

2. Q. What options are installed with a Typical installation?

   A. The following components are installed with a Typical
      installation:

         Microsoft Access
         User Assistance Help
         Microsoft Access Wizards
         Microsoft Excel ISAM
         Text ISAM
         xBASE ISAM
         Microsoft Graph version 5.0
         Northwind.mdb
         MSINFO
         Uninstall
         Briefcase Replication
         Calendar Control

      The following components are not installed with a Typical
      installation:

         Language Reference
         Developer Tools
         Paradox(R) ISAM
         Lotus(R) ISAM
         SQL ODBC driver
         Desktop ODBC drivers
         Solutions.mdb
         Orders.mdb

      For additional information about which components are installed
      with a Typical, Compact, or Complete installation, order item
      number Q136132 by selecting the FastTips Technical Library
      option from the FastTips Main Menu.

3. Q. How do I add or remove Microsoft Access for Windows 95
      components?

   A. To add or remove components in Windows 95, follow these steps:

      1. Click the Microsoft Windows 95 Start button, point to
         Settings, and then click Control Panel on the menu that
         appears.

      2. Double-click the Add/Remove Programs icon, and then follow
         the instructions in the Install/Uninstall dialog box.

      To add or remove components in Microsoft Windows NT 3.51,
      double-click the Microsoft Access Setup icon in your Microsoft
      Office group (or the group that contains your Microsoft Access
      icons).

4. Q. Should I keep my earlier version of Microsoft Access?

   A. If you plan to create or modify databases that are compatible
      with an earlier version of Microsoft Access, then yes, keep
      your earlier version until you have converted all your
      databases and are comfortable working in Microsoft Access for
      Windows 95.

      For example, if you maintain a database that is shared by
      people who have not yet upgraded to Microsoft Access for
      Windows 95, you need your earlier version to make modifications
      to that database. You can use Microsoft Access for Windows 95
      to open databases created in earlier versions and work with
      data in those databases, but you cannot use Microsoft Access
      for Windows 95 to modify or create objects in a database
      created in an earlier version unless you first convert that
      database to Microsoft Access for Windows 95 format.

5. Q. In Microsoft Access for Windows 95, I chose to open instead of
      convert my database created in an earlier version of Microsoft
      Access. Why did the file size change?

   A. Microsoft Access for Windows 95 supports the Visual Basic(R)
      for applications language that is common to some Microsoft
      Office programs. In order to use a 1.x or 2.0 database without
      changing its format, Microsoft Access creates a new system
      table to hold the Visual Basic translation of the database's
      Access Basic procedures. With this new system table, you can
      run your application in Microsoft Access for Windows 95 without
      having to convert your database.

      For additional information about using 1.x and 2.0 databases in
      Microsoft Access for Windows 95, order item number Q136131 by
      selecting the FastTips Technical Library option from the
      FastTips Main Menu.

6. Q. Why did my Access Basic DoCmd statements not convert correctly?

   A. During the conversion of your Microsoft Access 2.0 database,
      you may receive a message that states, "There were compilation
      errors during the conversion or enabling of this database,"
      and some of your DoCmd statements are not converted to use the
      new DoCmd object.

      The most common cause of this error message is that some of
      your Microsoft Access 2.0 modules were not compiled. To resolve
      the problem, open the database in Microsoft Access 2.0, open
      all the form and report modules that contain Access Basic code,
      and click Compile Loaded Modules on the Run menu. Then,
      reconvert your database to Microsoft Access for Windows 95.

      For additional information about conversion issues, order item
      number Q136133 by selecting the FastTips Technical Library
      option from the FastTips Main Menu. You can also find
      information in "Building Applications with Microsoft Access for
      Windows 95", Appendix A, "Converting or Using Applications
      Created in Previous Versions."

TO OBTAIN THIS APPLICATION NOTE

  • You can have this Application Note mailed or faxed to you from the automated Microsoft FastTips Technical Library, which you can call 24 hours a day, 7 days a week at (800) 936-4100. NOTE: The FastTips Technical Library is available only to customers within the U.S. and Canada.
  • If you are unable to access the source(s) listed above, you can have this Application Note mailed or faxed to you by calling Microsoft Product Support Services Monday through Friday, 6:00 A.M. to 6:00 P.M. Pacific time at (425) 635-7050. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, please see the Microsoft World Wide Offices Web Site at:

          http://www.microsoft.com/worldwide/default.htm
    
Keywords          : Fstqa Softlib kbappnote kbfile kbfasttip
Version           : 7.0
Platform          : WINDOWS
Hardware          : x86
Issue type        : kbinfo


================================================================================


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: October 21, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.