DOCUMENT:Q39179 26-JUN-2001 [utilities] TITLE :Using a Debugging Terminal with CodeView PRODUCT :Microsoft Programming Utilities PROD/VER::2.2,3.0,3.05,3.06,3.07,3.11,3.14,4.0,4.01,4.05,4.1 OPER/SYS: KEYWORDS:kb16bitonly kbCodeView kbDebug kbVC ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft CodeView for MS-DOS, versions 2.2, 3.0, 3.11, 3.14, 4.0, 4.01, 4.05, 4.1 - Microsoft CodeView for Windows, versions 3.0, 3.05, 3.06, 3.07, 4.0, 4.01, 4.1 ------------------------------------------------------------------------------- SUMMARY ======= It is possible to use either a dumb terminal or another computer (PC or Macintosh, running a communications package at 9600 baud) as a debugging terminal for CodeView. To take advantage of this option, do the following: 1. Connect the second terminal to the communications port (COM1 or COM2). 2. Initialize the communications package to set up the second computer as a dumb terminal. Set the baud rate at 9600. 3. Start CodeView. 4. From the CodeView command window redirect the output to the second terminal with one of the following dialog commands: " > COM1" (without the quotation marks) or " > COM2" (without the quotation marks) This causes CodeView to display the command window output on the second terminal. You can also redirect the input to the CodeView command window to come from the terminal with one of the following commands: " < COM1" (without the quotation marks) or " < COM2" (without the quotation marks) This causes CodeView to read the input from the second terminal. 5. Set your options and run the program. 6. To reset the CodeView command window output to the local machine use the following dialog command: " > CON" (without the quotation marks) To reset the CodeView command window input to the local machine use the following command: " < CON" (without the quotation marks) MORE INFORMATION ================ Note that this is not the same functionality as remote debugging. Remote debugging allows CodeView to run on a machine other than the local machine which runs the program being debugged. CodeView versions 4.0 and 4.01 support remote debugging. For more information on remote debugging, please refer to the documentation CodeView version 4.0. Additional query words: kbinf 2.20 3.00 3.50 4.00 4.10 ====================================================================== Keywords : kb16bitonly kbCodeView kbDebug kbVC Technology : kbAudDeveloper kbCodeView kbZNotKeyword3 kbCodeView220DOS kbCodeView300DOS kbCodeView311DOS kbCodeView314DOS kbCodeView400DOS kbCodeView401DOS kbCodeView405DOS kbCodeView410DOS kbCodeView300 kbCodeView305 kbCodeView306 kbCodeView307 kbCodeView400 kbCodeView401 kbCodeView410 Version : :2.2,3.0,3.05,3.06,3.07,3.11,3.14,4.0,4.01,4.05,4.1 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.