When Setup asks where you want the shared application files
installed, the option you select controls the choices your
users will have during client Setup:
+ Server.............The shared application files will remain on
the server and run remotely; the user won't
get a choice during client Setup.
+ Local Hard Drive...The shared application files will be copied
to the user's local hard drive; the user
won't get a choice during client Setup.
+ User's Choice......The user will be asked to choose Server or
Local Hard Drive during client Setup.
Setup then copies all files from the CD or floppy disks to the
administrative installation point.
After the installation is complete, share the two folders
(\Msoffice and \Msapps) on the network, either creating a single
share that contains both folders, or creating two separate
shares, one for each folder.
Client installation
To install Office on the client computers, users will:
- Connect to the main Office folder on the administrative
installation point.
- Run Setup.exe.
When users run client Setup from this administrative installation
point, they will see the Run From Network Server option in
addition to the other installation options. If a user selects
this option, the main Office application files are left on the
server and run remotely.
It is recommended that users have a read-only connection to the
server Office folder when they are running Setup, and also when
they are running the applications after a Run From Network Server
installation.
INSTALLATION ISSUES
Installing Office in Shared Windows for the First Time
The first time Office is installed to a user's computer in a
shared Windows environment, Setup will attempt to copy a few
Office files into the shared Windows folder. Although users
normally have read-only access to the shared Windows folder, the
first and second client installations of Office do require write
access to copy these files.
The first installation should be an administrative installation
The second installation should be a post-administrative
installation to the Shared Windows workstation. Both of these
installations require write access to the Shared Windows directory
on the server.
After the first and second installations are completed, the first
user's access rights to the shared Windows folder can be set back
to read-only. Subsequent users installing Office need only read-only
access to the Windows folder since the needed files will already
be present and Setup won't attempt to copy them again.
To correctly install Office 97 in a shared Windows environment,
follow these steps:
- Setup a shared Windows client that has full access privileges
to the shared Windows server.
- From this client perform an administrative install (Setup /a)
to any server. Setup may display the following error: "Setup
could not open the file: c:\Windows\System\OLE32.DLL. It is in
use by another application." To complete the administrative
install, click "Ignore" in the error message dialog box.
- Regardless of whether or not you received the ole32.dll error
you will need to manually copy these files from the CD to the
shared Windows\system folder:
D:\Office\WMS\Common\ole32.dll C:\Windows\System\ole32.dll
D:\Office\WMS\Win95\mapi32.dll C:\Windows\System\mapi32.dll
D:\Office\WMS\Win95\mapisrvr.exe C:\Windows\System\mapisrvr.exe
D:\Office\WMS\Win95\mdisp32.exe C:\Windows\System\mdisp32.exe
D:\Office\WMS\Win95\mdisp32.tlb C:\Windows\System\mdisp32.tlb
D:\Office\WMS\Win95\mspst32.dll C:\Windows\System\mspst32.dll
D:\Office\WMS\Win95\cmc.dll C:\Windows\System\cmc.dll
D:\Office\WMS\Win95\mapi.dll C:\Windows\System\mapi.dll
D:\Office\WMS\Common\wmsui32.dll C:\Windows\System\wmsui32.dll
Where D: is the CD-ROM drive and C: is the drive containing the
shared Windows\system folder.
- From the same client, perform a post-administrative run from
network server installation of Office.
- Once setup is complete launch Word or Excel and press Alt-F11 to
properly install VBA.
- After the above steps are completed other users with read-only
privileges to the shared Windows folder may perform their own
Office 97 installations.
Generic Icons Appear If Not Logged On Automatically
If you install Office using the Run From Network Server
installation option, but your computer is not configured to log
on to the server automatically at bootup, the program icons in
the Start menu will appear as generic icons, not as the normal
Office icons. The standard Office icons are only displayed if the
computer logs on to the server at bootup. If you log on to the
server after bootup, the generic icons are not replaced with the
standard Office icons.
Only the icon images are incorrect, the icons function correctly:
if you click an icon, after logging on to the server, it will run
the correct program.
Changing the Office Server Name After Installing VBA
If you run the shared components of Office from a network server,
and you connect to the server using a drive letter, Visual Basic
for Applications (VBA) will not run if you rename the server
share. Even though you specify a drive letter to the server, VBA
resolves this to a server name - if you change the name of the
server after installation, VBA will be unable to find the shared
components.
To address this situation, the Office 97 Resource Kit Tools and
Utilities includes the Windows System Policy template file
TypeLib.adm. By using this template to set the appropriate system
policies after you have renamed the server, you can reset
multiple user computers at the same time to use the correct new
server name. You must leave the policy in place because VBA
resets the server name each time VBA is run.
For information on how to obtain the Office 97 Resource Kit, see
"For More Information" at the end of this file.
To use the TypeLib.adm template file:
- Run the Windows System Policy Editor.
- In the Options menu, click Policy Template.
- Click Add and enter the template file path and name. For the
location of this file in the Office 97 Resource Kit Tools and
Utilities, see Appendix A, "Microsoft Office 97 Resource Kit Tools
and Utilities," of the Resource Kit.
- In the File menu, click New Policy to create a new policy file, or
click Open Policy to modify an existing policy file.
- Double-click the Default Computer icon.
- Select Re-register TypeLibs.
- If you installed Office using the Run From Network Server
installation type, set both the MSAPPS Path and ADMINROOT Path
policies. If you installed Office locally but are using shared
components on a network server, then set only the MSAPPS Path
policy.
- Each policy consists of a set of paths for TypeLib DLL files and
their associated help files. Modify the paths to include the
correct drive letter and path for your server.
- Save the policy file and place it on the appropriate network server
location. For more information on how to use system policies, see
Chapter 7, "Customizing and Optimizing Microsoft Office," in the
Office 97 Resource Kit.
Using Power Management with Run From Network Server Installation
If you are using advanced power management software on a computer
with Office installed using a Run From Network Server
installation, Office applications may fail if the computer goes
into suspend mode and then starts again. Make sure all Office
applications are closed before suspending the computer.
Administrative Setup Doesn't Copy Getting Results Art Files
The following files are not copied to the administrative
installation point during an administrative installation. These
files are used by Results97.html, the Web page that allows users
to go to "Getting Results with Microsoft Office 97" on the World-
Wide Web. The Web page is functional, but the pictures will not
be visible without these files.
To give users access to these files, you need to copy them
manually as shown to the Office server.
Copy from Office CD To Office Server
------------------- ----------------
D:\Cdonline\Art\Home_efc.gif E:\Msoffice\Cdonline\Art\Home_efc.gif
D:\Cdonline\Art\Homemsft.gif E:\Msoffice\Cdonline\Art\Homemsft.gif
D:\Cdonline\Art\Name.gif E:\Msoffice\Cdonline\Art\Name.gif
D:\Cdonline\Art\Navigate.gif E:\Msoffice\Cdonline\Art\Navigate.gif
Where D: is the CD-ROM drive and E: is the server on which you
created the administrative installation point. You will need to
create the Art folder on the Office server.
Extra Local Files Installed in Run From Network Server
When you install Office with a Run From Network Server
installation, some files are installed on the hard disk that are
not needed by Office 97 or that are duplicates of files available
on the Office server. As described below, you may be able to
delete these files to conserve local hard disk space on the
user's compute.
- If you intend for the user to use Outlook for e-mail and not
use Microsoft Exchange Client, then you can safely delete the
following files from the Windows\Form\Config folder after
installing Office:
MAPIF0.CFG
MAPIF0L.ICO
MAPIF0S.ICO
MAPIF1.CFG
MAPIF1L.ICO
MAPIF1S.ICO
MAPIF2.CFG
MAPIF2L.ICO
MAPIF2S.ICO
MAPIF3.CFG
MAPIF3L.ICO
MAPIF3S.ICO
MAPIF4.CFG
MAPIF4L.ICO
MAPIF4S.ICO
MAPIF5.CFG
MAPIF5L.ICO
MAPIF5S.ICO
- The following files are accessed from the server and are not
needed on the local hard disk. They may be deleted from the
local Windows folder after installing Office:
twain.dll
twunk_16.exe
twunk_32.exe
twain_32.dll
Use Drive Letter on Banyan Vines Network
If you are installing office on a Banyan Vines network using the
Run From Network Server installation type, or if Office
components are shared on a network server, then you should use a
drive letter to specify the location of the server during
administrative installation rather than a Universal Naming
Convention (UNC) path. The network UNC path used in a Banyan
Vines network may pose difficulties to Office applications
accessing the server. For this reason, Microsoft recommends that
you use a drive letter to specify the location of the Office
server during administrative installation.
Installing Office on a Banyan Vines Server
If you are running Office 97 Setup from Windows NT Workstation,
version 3.51 or later, using the Banyan Vines network client, you
will not be able to install Office on a Banyan Vines server. This
includes both an administrative installation on the server (Setup
/a), and a client installation to run Office from the server. In
each case, Setup displays an error saying that a filename is
invalid and Setup terminates.
The Banyan Vines network client for Windows 95 is able to write
to the Banyan Vines server successfully, so you can install
Office on a Banyan Vines server by running Setup (with the /a
option) on a Windows 95 computer using the Banyan Vines network
client. Alternatively, you can run Setup (with the /a option) to
another, non-Vines server, and then copy the folders manually to
the Vines server.
FOR MORE INFORMATION
Only the basic installation information has been described here.
For more details, including how to customize a network
installation for your specific needs, you should obtain a copy of
the "Microsoft Office 97 Resource Kit."
The Resource Kit is designed to help you successfully roll out
and support Office 97 and its component applications in your
organization. It includes information such as the architecture of
Office applications, detailed information about the installation
process and tools you use to customize this process, maintenance
and support information including frequently asked questions and
troubleshooting tips, information on how to use Office in a
workgroup, and how to switch from other applications. There is
also a CD-ROM with valuable tools and utilities, including an
electronic copy of the book itself. Look for Microsoft Office 97
Resource Kit at your local bookseller's.
You can also order the Microsoft Office 97 Resource Kit directly
from Microsoft Press:
- In the U.S., call 1-800-MSPRESS, Dept. FSUP.
- In Canada, call 1-800-667-1115.
- CompuServe members may order through GO MSP.
- Outside the U.S. and Canada, fax to International Coordinator,
+(425) 936-7329, or contact your local Microsoft subsidiary.
The Resource Kit is also available on the World-Wide Web at the
following URL:
http://www.microsoft.com/office/ork/
More information on issues presented in this file can also be
obtained by contacting Product Support Services. For information
on what support services are available from Microsoft, you can
use the Help menu in any Office application. From the Help menu,
click "About [Office application]", then click "Tech Support".
13.Nov.1996