DOCUMENT:Q135318 18-FEB-2002 [sna] TITLE :How to Setup IBM CA/400 to Work Over the SNA 2.11 Win 3.x Client PRODUCT :Microsoft SNA Server PROD/VER::2.11,3.0,4.0 OPER/SYS: KEYWORDS:kbinterop kbnetwork sna4 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 2.11, 3.0, 4.0 ------------------------------------------------------------------------------- SUMMARY ======= This article describes setting up Client Access 400 (CA400) with the SNA Server 2.11 or 3.0 Windows 3.x Client. MORE INFORMATION ================ To install CA400, follow these steps: 1. Install the SNA Server Windows 3.x client software by running the Setup program located in the \clients\win3x directory on the SNA Server 2.11 or 3.0 CD-ROM. 2. Using Notepad or another text editor, edit the [WNAP] section of the WIN.INI file so that the following values are modified as shown: CA400=YES CA400SharedFolders=YES 3. In the [SNAServerEHNAPPC] section, add the following entry: "LocalLU=" (without the quotation marks) The Local APPC LU alias can be found in SNA Server Admin. configured off the SNA Server service. This Local LU must be partnered with a Remote APPC LU associated with your AS/400 that is running OS/400 V3R1 or later. The parameter needs to be in all capital letters or several errors may occur. 4. Install the IBM Client Access/400 shared folders feature from the installation disks by running the INSTALL.EXE program. 5. After CA400 is installed, a dialog box appears telling you to restart Windows. Do NOT click OK! Instead, go to the \CAWIN directory and rename the following files: "rename EHNAPPC.DLL EHNAPPC.IBM rename EHNRTRW.DLL EHNRTRW.IBM" (without the quotation marks) 6. Return to the CA/400 dialog box and choose OK to allow CA/400 to restart Windows. 7. After restarting Windows, CA400's setup will continue. In the dialog box that appears, select the "Connect Type" as None. Choose OK. If installing v3.r1.m1 of CA/400, select "Other Router". You will then be prompted for a server name. Specify the Remote LU Name you assigned in SNA Server configuration. 8. After selecting OK, CA400 Setup will inform you that you need to restart Windows again because the configuration has changed. Do it. 9. After restarting, go into the CA400 folder and run the SETUP icon. You should see the SNA Server Windows 3.x client icon (WNAP.EXE) start up automatically. At this point, CA400 will attempt to log you into ANY AS400's you have configured thru SNA Server Admin. If the dialog box that comes up is pointing to an AS400 that is NOT running OSV3R1 (or better), press cancel. Do this until the dialog presents an AS400 that is running OSV3R1. At this point, enter the common user ID/Password for that system. 10. With Client Access Setup open on your screen, select the icon for the Rumba/400 install. When you select this option, CA400 will install Rumba/400 from the AS400 to your client. The following information is for reference purposes only. It shows the changes that may be made to system files. This may vary depending on what options you have chosen on your client. PCS.INI ======= [PCS/400] INITCFG=NO GROUP=INS RUMBA=INS [Shared Folders] SFLR01=1,I [UPDT] UPDT01=I:\QPWXCWN,C:\CAWIN,S,,,Client Access/400 UPDT02=I:\QPWXCRB\,C:\RUMBACAW,S,,,RUMBA/400 [NETWORK] I:=0 [ADVANCED] ExtraFunction=No NSD.INI ======= [Configuration] LANGUAGE=2924 DIRECTORY=C:\CAWIN COMMONUSERID= LOCALLUNAME= DLCTYPE=NonNSWin RTDN= [MODES] QPCSUPP=*, 2, 32, 16 QSERVER=*, 2, 32, 16 SNASVCMG=256, 1, 2, 1 BLANK=,2, 8, 4 #BATCH=256, 3, 8, 4 #INTER=, 7, 8, 4 WIN.INI ======= [SnaServerEHNAPPC] LocalLu=DONALD DILBERT=SNA [Wnap] WBinPath=C:\SNA.WIN Remote=DISNEYWORLD LocalFlag=LOCAL NosType=LANMAN NosSetup=WFW NetSetup=NO CA400=YES CA400SharedFolders=YES [CAWIN] EHNP=C:\CAWIN EHNL=2924 [CAMAPI] HLL=C:\RUMBACAW\EEHLLAPI.DLL SYSTEM.INI ========== [386Enh] device=C:\CAWIN\VREFLECT.386 device=C:\CAWIN\VNSWUTIL.386 device=C:\CAWIN\VNCD.386 AUTOEXEC.BAT ============ Autoexec.bat C:\DOS\SMARTDRV.EXE /L /X 2048 128 LH /L:1,40688 C:\DOS\MSCDEX.EXE /S /d:aspicd0 /m:12 @ECHO OFF PROMPT $P$G path c:\wfw311;c:\dos;C:\SNA.WIN;C:\RUMBACAW;c:\CAWIN; SET TEMP=C:\TEMP C:\WFW311\net start Additional query words: prodsna ====================================================================== Keywords : kbinterop kbnetwork sna4 Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211 kbSNAServ400 Version : :2.11,3.0,4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.