DOCUMENT:Q125881 10-JUL-2002 [sna] TITLE :Maximizing IND$FILE 3270 Host File Transfer Throughput PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1 OPER/SYS: KEYWORDS:kbnetwork kbtool kbsna211sp1 kbsna211sp2 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1 ------------------------------------------------------------------------------- SUMMARY ======= Windows NT SNA Server 3270 and other third-party 3270 emulators support host file transfer using the host IND$FILE interface. There are three ways you can improve performance: - Choosing a Fast SNA Link Interface to the Host - Maximizing the SNA Link Frame Size - Maximizing the 3270 Structured Field RU Size Choosing a Fast SNA Link Interface to the Host ---------------------------------------------- The fastest link type supported by SNA Server is a channel connection to the host. SNA Server 2.11 and later includes built-in support for channel adapters. Please refer to the SNA Server Companion Product Catalog for more details on available channel adapter support. Note: SNA Server 2.1 supports channel connections via third-party drivers. If a channel connection is not possible, the next fastest link type supported by SNA Server is an 802.2 connection to the host via Token Ring (16 Mbps) or Ethernet (10 Mbps). Maximizing the SNA Link Frame Size ---------------------------------- The maximum frame size supported by SNA Server and the host varies depending on the link type. The host frame size is configured in the MAXDATA= parameter in the PU definition in VTAM. This setting should match the "Max BTU size" in the SNA Server Connection configuration dialog in SNA Admin/Manager. Here are the maximum frame sizes supported (in bytes): 802.2 Token Ring connection (16 Mbps): 16393 802.2 Token Ring connection (4 Mbps): 4096 802.2 Ethernet connection: 1493 IBM SDLC/MPAA adapter or Microgate adapter: 521 The maximum frame size provided by third-party SNA Server link support depends on the third-party interface being used. Maximizing the 3270 Structured Field RU Size -------------------------------------------- Maximizing the SNA RU size reduces end-to-end acknowledgments at the 3270 application level. An RU is split into multiple messages if the frame size is smaller. First, the query bit on the LU definition at the host must be enabled in order to support structured field file transfer. This is enabled in bit 0 (the high order bit) on byte 1 in the PSERVIC parameter which you can configure in the MODEENT on the 3270 LU's DLOGMODE mode entry: PSERVIC=X'0280xxxx... Byte 0 is the LU type (02 in this example) Byte 1 is used by VSCS and needs to be set as follows: 80 - Device supports extended data stream capability. It supports write structured field (WSF) and read partition query (Query) structured field. Otherwise, screen-mode transfer is used, limiting the data RU size to 1920 bytes. The RU size supported by the host is configured in the RUSIZES=LU mode entry (MODEENT). Here are common values used: 8787 = 1024 8888 = 2048 8989 = 4096 8A8A = 8192 8B8B = 16384 8C8C = 32768 The RU size is computed as follows: RUSIZES = MNMN, where the RU size = M*2^N. This specifies the maximum length of data (request units) in bytes that the primary or secondary can send to each other. The leftmost two digits apply to the secondary (SNA Server) logical unit, and the rightmost two digits apply to the primary (host) logical unit. If set to 00, then the default size (no limit on the RU size) is used. Within the 3270 emulator, the structured field file transfer RU size must be specified in the file transfer configuration. Within SNA Server 3270, this is set in the Packet Size field within the 3270 File Transfer dialog box. The maximum value is 32767. MORE INFORMATION ================ While the SNA link interface and frame size are often not adjustable, maximizing the 3270 structured field file transfer RU size can provide dramatic performance improvements. However, IND$FILE is not an efficient file transfer method. For higher throughput host file transfer, an LU 6.2-based file transfer product should be considered. Additional query words: prodsna ind$file 3270 file transfer ====================================================================== Keywords : kbnetwork kbtool kbsna211sp1 kbsna211sp2 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna400sp1 Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ200 kbSNAServ211 kbSNAServ400 kbSNAServ210 kbSNAServ211SP1 kbSNAServ211SP2 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ300SP2 Version : WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2002.