BUG: DBCombo Control Change Event Does Not Fire

Last reviewed: June 2, 1997
Article ID: Q166929
The information in this article applies to:
  • Microsoft Visual Basic Professional and Enterprise Editions for Windows, version 5.0

SYMPTOMS

Program code in the Change event procedure of Microsoft Visual Basic version 5.0 will not execute. Applications written using Visual Basic version 4.0 may no longer work as expected if functionality is based on responding to a Change event in a DBCombo control.

RESOLUTION

The resolution to this behavior is to replace the functional code of the Change event procedure with equivalent code entered in the Click event procedure. This code is conditioned by testing the DataChanged property of the DBCombo control.

An example of this workaround is as follows:

   Private Sub DBCombo1_Click(Area As Integer)
      If DBCombo1.DataChanged Then
         ' Any code that would normally be in the Change Event
         ' or call the Change event like this: DBCombo1_Change
         ' followed by code that resets the DataChanged property, such as:
         DBCombo1.DataChanged = False
      End IF
   End Sub

If the user normally tabs to the DBCombo control and then uses arrow keys to navigate to an item in the list, similar code would be required in the KeyPress, KeyDown and/or KeyUp event procedures. In this case, it would be more effective to write a single form-level module to replace the code of the DBCombo Change event and call it from the various places where the DBCombo.DataChanged property would be tested.

STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

Steps to Reproduce Behavior

  1. Start a new Standard EXE project. Form1 is created by default.

  2. On Form1, place two Data Controls named Data1 and Data2.

  3. Set the following values for the properties of Data1:

       Name            Data1
       DatabaseName    C:\Program Files\DevStudio\VB\Biblio.mdb (or the
                       appropriate path to that database)
       RecordsetType   0 - Table
       RecordSource    Titles
    
    

  4. Set the following values for the properties of Data2:

       Name            Data2
       DatabaseName    C:\Program Files\DevStudio\VB\Biblio.mdb (or the
                       appropriate path to that database)
       RecordsetType   2 - Snapshot
       RecordSource    SELECT PubID, Name FROM Publishers ORDER BY Name
    
    

  5. Place a DBCombo control on the form.

  6. Set the following values for the properties of DBCombo1:

       Name            DBCombo1
       BoundColumn     PubID
       DataField       PubID
       DataSource      Data1
       ListField       Name
       RowSource       Data2
       Style           0 – dbcDropDownCombo
    
    

  7. In the module for the form, enter the following:

          Private Sub DBCombo1_Change()
    
             Debug.Print "In the Change Event Method"
          End Sub
    
    

  8. Run the form. Click the down arrow to the DBCombo to open the list portion.

  9. Click any line in the list portion. Observe the Immediate (Debug) Window.


Keywords : vb5all VBKBCtrl VBKBDB
Version : 5.0
Platform : WINDOWS
Issue type : kbbug


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 2, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.