FILE: Windows Help Authoring Tool (WHAT6) for Word 6.0

ID: Q140875

The information in this article applies to:

SUMMARY

Microsoft has developed an internal tool called the Windows Help Authoring Toolkit for Microsoft Word version 6.0 for Windows (WHAT6). This tool is used within Microsoft to help create Help files. Microsoft is now providing this internal tool to our customers. 


---------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY    |
| ACCOMPANY THIS DOCUMENT (collectively referred to as Microsoft     |
| Software Library [MSL] WHAT6.EXE) IS PROVIDED "AS IS" WITHOUT      |
| WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT   |
| NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR    |
| FITNESS FOR A PARTICULAR PURPOSE. The user assumes the entire risk |
| as to the accuracy and the use of this MSL file. This MSL file     |
| may be copied and distributed subject to the following conditions: |
| 1) All text must be copied without modification and all pages must |
| be included; 2) If software is included, all files must be copied  |
| without modification; 3) All components of this MSL file must be   |
| distributed together; and 4) This MSL file may not be distributed  |
| for profit.                                                        |
|                                                                    |
| MICROSOFT IS UNABLE TO SUPPORT OR ASSIST YOU, SHOULD YOU HAVE      |
| PROBLEMS USING THIS TOOL.                                          |
|                                                                    |
| Copyright 1994 Microsoft Corporation. All Rights Reserved.         |
| Microsoft is a registered trademark of Microsoft Corporation.      |
 --------------------------------------------------------------------

Please refer all your questions on WHAT6 to the WHAT6 Help menu.

How to Obtain WHAT6 and Related Files

WHAT6.EXE contains WHAT6.DOT and related files.

The following file is available for download from the Microsoft Software Library:

~ what6.exe

For more information about downloading files from the Microsoft Software Library, please see the following article in the Microsoft Knowledge Base:
Q119591 : How to Obtain Microsoft Support Files from Online Services


After downloading it, run WHAT6.EXE in an empty directory to obtain the files it contains.


MORE INFORMATION

Introduction to WHAT6

The Windows Help Authoring Toolkit for Microsoft Word version 6.0 for Windows (WHAT6) consists of a Microsoft Word version 6.0 template file (WHAT6.DOT), Help files to assist you in using WHAT6.DOT, and Windows programs for creating bitmap hotspots and managing your Help project.

WHAT6 helps you create and edit Help topics. WHAT6 makes creating Help files easier by providing dialog boxes to add Help features that would otherwise need to be created using specialized Help coding and word- processing functions. For example, instead of entering footnotes for a topic's context string and title, you can type the information into a dialog box.

The Help Authoring Template (WHAT6.DOT) makes it easier for you to:

How the WHAT6.DOT Template Works

The Help Authoring Template is similar to other Word for Windows templates. It contains a set of specialized macros and styles that become available when you open a document based on the template. The template modifies existing commands and adds new commands to the Word for Windows menus. The result is a version of Word for Windows that has all the word-processing functionality and yet is optimized for creating Help files.

Requirements

The WHAT6.DOT template requires Microsoft Word version 6.0 for Windows and Windows Help version 3.10.505, which is fully compatible with Word for Windows 6.0 Rich Text Format (RTF).

WHAT6 Includes 32 Files and Uses 2.72 Megabytes of Space

The following lists give the files names and directory locations for all files that are a part of the WHAT6 utility. There is no SETUP utility for this tool, so you will need to copy the files to the indicated directory.

The directory choices are as follows: 

\WINDOWS          The Windows directory (for example, C:\WINDOWS)
\WINDOWS\SYSTEM   The System directory (for example, C:\WINDOWS\SYSTEM)
\WINWORD          Where WINWORD.EXE is located (for example, C:\WINWORD)
\WINWORD\TEMPLATE Where you have your Word for Windows templates (.DOT
                  files) are located (for example, C:\WINWORD\TEMPLATE)
\HELP             The Help file working directory. You can place
                  this directory anywhere you want and name it anything
                  you want (for example, C:\WINWORD\HELP). You will need
                  to create this directory.
\HELP\SAMPLE      Where the Help file samples will be placed. It is
                  usually set up as a directory off of your Help working
                  directory (for example, C:\WINWORD\HELP\SAMPLE). You
                  will need to create this directory.

WHAT6 Template Files


WHAT6.DOT     WHAT6 template used by Microsoft Word version 6.0. Copy to
              your \WINWORD\TEMPLATE directory.
WHAT6.STY     Style sheet used by the WHAT6 template. Copy to your
              \WINWORD\TEMPLATE directory
WHAT6.INI     Initialization file for WHAT6. Copy to your \WINDOWS
              directory.
STYLES.DLL    Collection of functions used by the WHAT6 template. Copy to
              the \WINDOWS\SYSTEM directory

WHAT6 Help Tools


WHPE.EXE      Help Project Editor. Copy to your \HELP directory.
HCPARSE.DLL   Parses the HPJ file into a format used by WHPE.EXE
SHED.EXE      HotSpot Editor. Copy to your \HELP directory.
MRBC.EXE      Multiple Resolution Bitmap Compiler. Copy to your \HELP
              directory.

WHAT6 Help Authoring Help Files


WHPE.HLP      Project Editor Help. Copy to your \HELP directory.
WHAT6.HLP     Help on WHAT6.DOT. Preferably, copy it to the place
              where your template is stored in your \WINWORD\TEMPLATE
              directory.
BLDERROR.HLP  Help Compiler Errors. Copy to your \HELP directory.
HAG.HLP       Help Authoring Guide. Copy to your \HELP directory.

Help Compiler Files


HC.EXE        Version 3.10.505. Copy to your \HELP directory
              NOTE: 32 bit applications will need to use HCW.EXE
                    which is included with Professional and
                    Enterprise Editions of the Microsoft Visual
                    Basic Programming System for Windows,
                    Version 4.0
HC.ERR        Help Compiler Error file. Copy to the \HELP directory.
HCP.EXE       Protect Mode Version 3.10.505. Copy to your \HELP
              directory.
HCP.ERR       Help Compiler Error file. Copy to your \HELP
              directory.

Sample Files


HELPEX.HPJ    Copy to your \HELP\SAMPLE directory.
HELPEX.RTF    Copy to your \HELP\SAMPLE directory.

Help Bitmaps


BIGBUT.BMP    Copy to your \HELP\SAMPLE directory.
BOOK.BMP      Copy to your \HELP\SAMPLE directory.
BULLET.BMP    Copy to your \HELP\SAMPLE directory.
CHICLET.BMP   Copy to your \HELP\SAMPLE directory.
CLOSED.BMP    Copy to your \HELP\SAMPLE directory.
DOC.BMP       Copy to your \HELP\SAMPLE directory.
EMDASH.BMP    Copy to your \HELP\SAMPLE directory.
LEAF.BMP      Copy to your \HELP\SAMPLE directory.
MINUS.BMP     Copy to your \HELP\SAMPLE directory.
NEXT.BMP      Copy to your \HELP\SAMPLE directory.
OPEN.BMP      Copy to your \HELP\SAMPLE directory.
PLUS.BMP      Copy to your \HELP\SAMPLE directory.

Other Files


WHAT6.ICO     Icon for use with Program Manager. Copy to your \HELP
              directory.
HAG.ICO       Icon for the Help Authoring Guide. Copy to your \Help
              directory.
CMDIALOG.VBX  Common Dialog Custom control used by WHPE.EXE.
              Copy to your \WINDOWS\SYSTEM directory.
WHAT6.TXT     A readme file similar to this article.

WHAT6.HLP Help File

After you copy the WHAT6.HLP file to your computer, note which directory it is in. Then modify the macro called HelpOnWhat to point to this location by following these steps:
  1. From within Word version 6.0, choose New... from the File Menu.


  2. From the New dialog, select the Document radio button in the lower left and then select WHAT6 from the Template Combo Box.


  3. Choose Macro from the Tools menu.


  4. Select HelpOnWhat from the Macro Name Combo Box, and choose Edit.


  5. Find the line of code that reads:
    
   t = WinHelp(hwnd,"\\merlin\winhelp\what\help\what6.hlp", hlpINDEX, 0)


  6. Edit the command line so that it matches the location of the help file (for example, replace "\\merlin\winhelp\what\help\what6.hlp" with "C:\WINWORD\TEMPLATE\WHAT6.HLP").


  7. From the File menu, choose Close, and save the macro.


  8. Close your document. When you're asked if you want to save changes to the .DOT template, choose Yes.


Setting up Icons in Program Manager

When you finish copying all the files to their correct locations, you may want to set up icons for some of the files and place them in a group in Program Manager. To do this, follow these steps:
  1. Select an existing group or create a new group in Program Manager. To create a new group, choose New form the File menu in Program Manager. Select Program Group, and choose OK. Then type in a description for the new group and choose OK.


  2. Once you have a program group selected, choose New form the File menu in Program Manager. Select Program Item, and choose OK. Then type in a description, command line, and working directory, and choose OK. Repeat this process for each of these items:
    
   Description:         Help Project Editor
   Command Line:        C:\WINWORD\HELP\WHPE.EXE
   Working Directory:   C:\WINWORD\HELP

   Description:         HotSpot Editor
   Command Line:        C:\WINWORD\HELP\SHED.EXE
   Working Directory:   C:\WINWORD\HELP

   Description:         Help Compiler Errors
   Command Line:        C:\WINWORD\HELP\BLDERROR.HLP
   Working Directory:   C:\WINWORD\HELP

   Description:         Help Authoring Guide
   Command Line:        C:\WINWORD\HELP\HAG.HLP
   Working Directory:   C:\WINWORD\HELP


For this last item (HAG.EXE), an icon file is provided. To use it, click the icon that you just created in the program group in Program Manager to select it. Then choose Properties from the File menu, and select Change Icon. In the File Name field, type the path and file name of the desired icon (for example, C:\WINWORD\HELP\HAG.ICO), and choose OK.

Getting Started

Follow these steps to get started learning to use the Project Editor and the WHAT6 template to create a new Windows Help File.
  1. Assuming you have set up icons for the installed components as described above, double click the Help Project Editor.


  2. Choose Project from the Edit menu in the Project Editor.


  3. In the Project Dialog box, create the Title and Contents description for your project. Use 3.1 as your help version, or the WHAT6 template won't be used. Choose OK when finished.


  4. From the Edit menu, choose Add New or Existing File.


  5. When the dialog box appears, type in a new file name with an .RTF extension. Choose OK.

    Choose Cancel if a dialog box appears with this message:

    "<filename>.RTF does not exist. Create it, based on WHAT30.DOT?"

    Return to Step 2. The project editor has not been set up correctly. Make sure you selected 3.1 as the help version.

    Everything is fine if a dialog appears with this message:

    "<filename>.RTF does not exist. Create it, based on WHAT6.DOT?"

    Choose OK. The file will then be added to the project list.


  6. Select the file in the project list. Then from the Edit menu, choose Edit File. This will load Word version 6.0 for Windows and open your file using the WHAT6 template.


  7. For further instruction on how to use the Help Project Editor or the WHAT6 template, please see the Help file provided for each of these tools by using the Help menu.


Multiple Resolution Graphics

In addition to the .DOT and .HLP files, the WHAT6.EXE self-extracting file also contains tools (SHED.EXE and MRBC.EXE) to help you compile multi-resolution bitmaps (MRBMs) into your help file. You can use these tools to make your graphics look good on monitors of various resolutions.

To create MRBMs, first take screen dumps of your graphic in each of the resolutions you need (EGA, VGA, and 8514). Then create three separate .SHG files using SHED.EXE (hotspot editor). Even if you don't have hotspots in your graphic, create the separate *.SHG files. Then combine the three .SHG graphics into one .MRB using MRBC.EXE.

When making this kind of file, be sure to archive the original .BMP and .SHG files in case you need to modify anything later.

It is useful to use SHED even if you're not putting hotspots in the graphic. SHED interprets graphics the same way WINHELP.EXE does. You can be reasonably sure that once the graphics are saved in SHED, they will look good in your Help file.

Additional query words: 3.00 4.00 obu MSL 


Keywords          : kbmacro kbtool kbVBp400 TlsHC VB4WIN w4wtemplate 
Version           : WINDOWS:1.0,3.11,4.0,6.0,6.0a,6.0c
Platform          : WINDOWS 
Issue type        :

Last Reviewed: May 19, 1999