PRB: VB3: Converting MBF to IEEE in Visual Basic for Windows

ID: Q113439

The information in this article applies to:

SYMPTOMS

Data files created with older Microsoft Basic products (Quick Basic, GW-Basic, and Basica (IBM and Compaq licensed Basic)) may not be readable by Visual Basic for Windows.


CAUSE

Prior to the IEEE floating point standard being widely accepted, Microsoft used an internal floating point format known as Microsoft Binary Format (MBF). The IEEE standard was introduced later and became the industry standard.

Early versions of Microsoft QuickBASIC and GW-Basic supported only MBF format. In Microsoft Basic Professional Development System (PDS) and Visual Basic for MS-DOS functions are available to convert between MBF and IEEE formats. As Microsoft moved toward complete acceptance of the IEEE standard, however, support for the MBF format was removed.

Visual Basic for Windows uses the IEEE standard. The MBF format, however, is incompatible with the IEEE standard and data saved in this manner will not be readable.


WORKAROUND

The PDS and Visual Basic for MS-DOS products contained functions that convert between MBF format and IEEE format. These functions are not available in Visual Basic for Windows. Here are two possible solutions to this dilemma:

  1. A program could be written in PDS or Visual Basic for MS-DOS that re-creates the file containing the MBF data. After reading the file information into PDS or Visual Basic for MS-DOS, you can use the MKxMBF$ functions (see the manuals for PDS or Visual Basic for MS-DOS or their Help menus) to convert the data to IEEE format. This method is preferred for two reasons:



  2. Previously, there was no way to convert the data from Visual Basic for Windows. But now there is a DLL available to do this. This DLL (MBF2IEEE.DLL) contains functions that simulate the MKS, MKD, CVS, and CVD functions that were present in some of the MS-DOS-based Basic products. These function (MKS, MKD, CVS, and CVD) do not exist in Visual Basic for Windows, thus the need for this DLL. The More Information section below gives details about the DLL and explains how to download it from the Microsoft Software Library.



STATUS

This behavior is by design.


MORE INFORMATION

Details About Method Two: Using MBF2IEEE.DLL

NOTE: These functions all do conversions between Microsoft Binary Format (MBF) and IEEE floating point values. Some of the newer MS-DOS-based Basic products had versions of these functions that worked differently. For example, they let you look at an IEEE number as a string without converting it to MBF. The routines described here are only provided as a way of retrieving old MBF data.

These function provide conversions between IEEE floating point values and Microsoft Binary Format (MBF) floating point values. Below is a set of declare statements which must be included in a Visual Basic program which will call these functions: 

   Declare Function Cvs Lib "MBF2IEEE.DLL" (X As String) As Single
   Declare Function Cvd Lib "MBF2IEEE.DLL" (X As String) As Double
   Declare Function Mks Lib "MBF2IEEE.DLL" (X As Single) As String
   Declare Function Mkd Lib "MBF2IEEE.DLL" (X As Double) As String

Below is a description of each of these functions along with an example.

CVS and CVD Functions

These functions accept a 4-byte (CVS) or 8-byte (CVD) string as an argument. They expect the bit pattern of this string to represent a single or double precision MBF value, respectively. The function will return an IEEE result. 

   Dim MBF As String, IEEE As Single
   ' load the string from a file, etc.
   IEEE = CVS(MBF)

MKS and MKD Functions

These functions accept an IEEE single (MKS), or double (MKD) precision value as an argument. It will then convert this value into a 4- or 8-byte MBF value and return it in a string. 

   Dim MBF AS String, IEEE As Single
   MBF = MKS(IEEE)
   ' Now write the MBF value out to disk

Potential Problems

There are differences between the IEEE format and MBF. For this reason precision may be lost during the translations. It is also possible that a number will not be able to be converted between the two formats. If this is the case, a Visual Basic Overflow (Error #6) will be generated. This is a trappable error, so handle the error accordingly.

How to Get MBF2IEEE.DLL

MBF2IEEE.EXE is a self-extracting compressed file that contains a compiled DLL file and the source code to create a DLL file that converts Microsoft Binary Format (MBF) data files created in early version of Quick Basic, GW- Basic, and BASICA to the industry standard IEEE data format.

The following file is available for download from the Microsoft Software Library:

~ Mbf2ieee.exe

For more information about downloading files from the Microsoft Software Library, please see the following article in the Microsoft Knowledge Base:
Q119591 : How to Obtain Microsoft Support Files from Online Services


After downloading MBF2IEEE.EXE, run it to obtain MBF2IEEE.DLL along with the source files and a MBF2IEEE.TXT file, which is a readme that contains the text of this article.

Source Code Included in MBF2IEEE.EXE

In addition to the .DLL itself, you will also find the source code, so you can make modifications and recompile if you have Microsoft C. To recompile and build a new .DLL file, you must use Microsoft C because the routines are specific to Microsoft C and rely on the way Microsoft C returns floating point Values. It will not compile with Borland C.

To recompile with Microsoft C, use the following command line statements to build the DLL: 

    cl -ALw -Ow -W2 -Zp -Tp mbf2ieee.c
    link /nod c:\vb\cdk\vbapi.lib mbf2ieee, mbf2ieee.dll, NUL, sdllcew
       oldnames libw, mbf2ieee
    rc -t mbf2ieee.dll
    implib mbf2ieee.lib mbf2ieee.def 


Keywords          : vbwin 
Version           : 3.00
Platform          : WINDOWS 
Issue type        :

Last Reviewed: June 23, 1999