Byte-Ordering in a Data Packet Under NDIS

ID: Q89374

The information in this article applies to:

SUMMARY

There may be a difference in the byte order in which 16-bit words are stored in memory versus the order in which the two bytes must be transmitted onto the network as part of a data packet. This difference will depend on the processor involved and which part of the data packet the information falls under.

The information is this article is consistent with the Network Device Interface Specification (NDIS) version 3.0.


MORE INFORMATION

Consider that the data will consist of header(s), the application data, and a trailer(s). 


      -------------------------------
      |    |    |                |    |------- Trailer
      -------------------------------
        |    |          |____ Application data
        |    |
        |    |____ Header
        |
        |____ Header
When a protocol driver or an NDIS driver sends information, it does not modify the application data, nor does it modify the ordering of bytes in integer fields.

The ordering of bytes in integer fields within the application data is the responsibility of the Remote Procedure Call (RPC) facility or another mechanism. However, the driver should be concerned with how the information in the header(s)/trailer(s) is stored. For example, the driver may be required to put a 16-bit checksum in a header. To put that integer value into the header in the format required by the network specification, the driver may need to know the type of processor that it is running on and will in any case need to follow the network standard for storing the information in the header.

Additional query words: 3.10 3.50 


Keywords          : 
Version           : 3.10 3.50 3.51
Platform          : NT WINDOWS 
Issue type        :

Last Reviewed: July 30, 1999