DOCUMENT:Q90052 01-NOV-1999 [win95x] TITLE :Banyan VINES Err Msg: The Switch Has Been Prevented. Cannot... PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.1, 3.11 ------------------------------------------------------------------------------- SYMPTOMS ======== If you run Windows version 3.1 in 386 Enhanced or Standard Mode while connected to Banyan Vines network version 4.10 or 5.00, and you attempt to run an MS-DOS-based application, the following error message may be displayed: The switch has been prevented. Cannot start application. CAUSE ===== This error message may occur because Windows has not been set up with the proper network driver, or is set up for "No Network" (without the quotation marks). WORKAROUND ========== After receiving the above error message, check the maintenance mode of the Windows Setup program, and make sure the system setting for Network is Banyan VINES (and the appropriate version). If it is not, change the setting using either of the following methods: 1. Choose the Windows Setup icon from the Main group in Program Manager. 2. From the Options menu, select "Change System Settings..." 3. Select "Banyan VINES (Version 4.1 or Version 5.0)" from the available choices, and follow the instructions from the Setup program. - OR - 1. Exit Windows. 2. Change to the current Windows subdirectory, and type setup 3. Use the arrow keys to highlight the network information, and press the ENTER key. 4. Select "Banyan VINES (version 4.1)" and press ENTER. 5. Press ENTER to accept the configuration, then follow the instructions from the Setup program. If Banyan VINES (Version 4.1) is your selected network, and you still receive the error message above, then your setup probably failed. Try removing and reinstalling support for network as follows: 1. Choose the Windows Setup icon from the Main group in Program Manager. 2. From the Options menu, select "Change System Settings..." 3. Select "No Network Installed" from the available choices, then follow the instructions from the Setup program. 4. Run Windows Setup again. 5. From the Options menu, select "Change System Settings..." 6. Select "Banyan VINES (version 4.1)" from the available choices, then follow the instructions from the Setup program. The product included here is manufactured by Banyan, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability. Additional query words: 3.10 3.11 err msg 3rdparty ====================================================================== Keywords : Technology : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311 Version : WINDOWS:3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.