DOCUMENT:Q97487  30-SEP-1999  [win3x]
TITLE   :Can't Find "drivername=PCNIC$" in PROTOCOL.INI
PRODUCT :Microsoft Windows 3.x Retail Product
PROD/VER:WINDOWS:3.1
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows for Workgroups version 3.1 
-------------------------------------------------------------------------------

The following article contains information on the use of Windows for
Workgroups with third-party products or configurations that have not
been tested and are not supported by Microsoft.

If the steps or procedures described in this article do not function
properly, contact the manufacturer of the third-party product for more
information or use a supported configuration.

SYMPTOMS
========

The IMC PCNIC8 network interface card (NIC) made by ACS Telecom includes its own
OEMSETUP.INF file. You may have problems when you try to install this NIC due to
an error in the OEMSETUP.INF file. When you restart your computer, an error
message appears stating that "drivername=PCNIC$" cannot be found.

CAUSE
=====

This error is caused by an incorrect PROTOCOL.INI setting. After you install the
driver for this NIC, the following is entered in the PROTOCOL.INI file:

      [IMC$PCNIC8]
      drivername=PCNIC8$

WORKAROUND
==========

This setting should be changed as follows:

      [IMC$PCNIC8]
      drivername=PCNIC$

For more information, contact ACS Telecom.

The product included here is manufactured by a vendor external to Microsoft; we
make warranty, implied or otherwise, regarding this product's performance or
reliability.

Additional query words: 3.1 3.10 ndis

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW310
Version           : WINDOWS:3.1

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.