DOCUMENT:Q81349 12-OCT-1999 [win95x] TITLE :Floppy Drives with WordPerfect 5.1 and Windows PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.0,3.0a,3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= WordPerfect version 5.1 may cause erratic floppy drive performance or violated system integrity errors when running under Microsoft Windows. Floppy drive problems can be caused by the following features: - WordPerfect's cursor speed enhancement feature - Saving a file using WordPerfect's F10 function key MORE INFORMATION ================ WordPerfect's Cursor Speed Enhancement Feature ---------------------------------------------- WordPerfect testing has confirmed that the cursor speed enhancement feature included with WordPerfect version 5.1 can be linked to floppy drive problems. This feature adjusts the system clock timer, which also seems to affect floppy drive performance. It is suggested that you use the /NC switch to disable this feature for troubleshooting these problems in enhanced mode. Saving a File Using WordPerfect's F10 Function Key -------------------------------------------------- You may have difficulty saving a file to the floppy drive if you use the F10 (save) key in WordPerfect version 5.1 when you are in Microsoft Windows version 3.0 enhanced mode. You may receive an error message stating that WordPerfect version 5.1 cannot read the drive. Possible Workarounds -------------------- 1. Exit Windows and restart Windows, then return to WordPerfect. 2. Open the CONFIG.SYS file in WordPerfect. Make sure HIMEM.SYS is loaded prior to any other device drivers in the CONFIG.SYS file, as in the following example: DEVICE=C:\HIMEM.SYS FILES=30 BUFFERS=30 DEVICE=C:\DRIVERNAME 3. Add the following lines to the [386ENH] section of the SYSTEM.INI: HighFloppyReads=NO EMMExclude=E000-EFFF This workaround appears to correct a conflict between the way WordPerfect 5.1 makes floppy drive calls and some system's shadow RAM addressing. 4. Save your changes and exit by pressing the F7 key in WordPerfect. You can still designate the desired drive with the F7 key. (Verify that the disk has been formatted and is readable at the MS-DOS prompt.) NOTE: Another way to save in WordPerfect is to block the document by pressing ALT+F4 and then pressing F10 to save the "block name" to the floppy disk. The product included here is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability. Additional query words: 3.00 3.00a 3.0a 3.1 3rdparty 3.11 word perfect wp ====================================================================== Keywords : Technology : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a kbWin310 kbWin311 Version : WINDOWS:3.0,3.0a,3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.