DOCUMENT:Q32847 18-DEC-2000 [win95x] TITLE :Jumper Settings For PC Network/Baseband Adapters PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:1.x,2.x,3.0,3.0a,3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 1.1, 2.03, 2.1, 2.11, 3.0, 3.0a, 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article discusses jumper settings for the IBM PC Network Adapter and Baseband Adapter for both file servers and bridges. The following are jumper-configurable parameters for the PC Network Adapter/Baseband adapter and conflicts that may occur: - The Interrupt Line address may conflict with devices such as the Microsoft Bus Mouse, hard drive controllers, serial and parallel ports. - The Base I/O address may conflict with expanded memory boards. - The Memory Map Address may conflict with the memory addresses used by expanded memory board drivers, 3270 cards, ESDI hard-drive controllers, and display adapters. It may be necessary to change jumper settings on the PC Network Adapter and/or other cards in the system to avoid such conflicts. MORE INFORMATION ================ The following are Interrupt Jumper Settings: (Jumper W1) Interrupt 2 - pins 1 & 2 jumpered Interrupt 3 - pins 2 & 3 The following are Base I/O Address Jumper Settings: (Jumper W4) Address 620-627 - pins 1 & 2 jumpered Address 628-62F - pins 2 & 3 The following are Memory Address Jumper Settings: (Jumper W5) Address CC00-CDFF - pins 1 & 2 jumpered Address DC00-DDFF - pins 2 & 3 jumpered Additional query words: 1.x 2.03 2.10 2.11 3.00 3.00a 3.10 3.11 win30 win31 ====================================================================== Keywords : Technology : kbWin3xSearch kbZNotKeyword3 kbWin110 kbWin203 kbWin210 kbWin211 kbWin300 kbWin300a kbWin310 kbWin311 Version : WINDOWS:1.x,2.x,3.0,3.0a,3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.