DOCUMENT:Q83679 04-OCT-1999 [win95x] TITLE :Manual and Network Install of the TrueType Font Pack PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article describes the following options for installing the Microsoft TrueType Font Pack into Microsoft Windows 3.1: - Normal installation - Manual installation because of error - OLE Drag and Drop installation - Network installation MORE INFORMATION ================ Normal Installation ------------------- 1. Close any open applications, so only Windows 3.1 is running. 2. Insert the Microsoft TrueType Font Pack into drive A. 3. In Windows Program Manager, choose Run from the File menu. 4. In the Command Line box, type a:\setup and choose the OK button. 5. Follow the online instructions. Manual Installation Because of Error ------------------------------------ When attempting to install the TrueType Font Pack, you may encounter the following error message: DSHELL.DLL caused a General Protection Fault in module USER.EXE at segment XXXX:xxxx To work around this error, the Font Pack can be installed manually: 1. Copy the EXPAND.EXE file from the Windows disk 3 (1.44MB and 1.2MB) into the WINDOWS directory. 2. Expand all the *.TT_ files into the WINDOWS\SYSTEM directory from the original Windows disk 1 by typing the following: c:\windows\expand a:*.tt_ c:\windows\system Repeat for disk 2. 3. Rename all the *.TT_ files in the WINDOWS\SYSTEM directory to *.TTF by typing the following: rename *.tt_ *.ttf 4. Start Windows and run the Control Panel. 5. Choose Fonts and then the Add button. 6. Change to the WINDOWS\SYSTEM directory. 7. Choose the Select All button and then choose OK. OLE Drag and Drop Installation ------------------------------ 1. From File Manager double click the subdirectory that contains the .TTF or .TT_ files. 2. From Control Panel, run Fonts. 3. Return to File Manager and highlight the fonts you want to install. 4. Drag and drop the font selection on the Fonts dialog. The files will be added and uncompressed if necessary. Network Installation -------------------- There are two ways to do a network install: - Allow all workstations access. -or- - Allow only one or more workstations to access the fonts. All Workstations Have Access NOTE: Make sure you are using a network license pack if multiple users will have access to the TrueType Font Pack. Pricing and availability information is available at the Microsoft Sales Information Center (MSIC) by calling (800) 426-9400. 1. From one workstation, start Windows. 2. From the File menu, choose Run. 3. Type the following and press ENTER: a:setup 4. The Setup program expands all the files into the Windows shared directory on the server and updates the workstation's WIN.INI file for the fonts. 5. For other workstations to have access to these fonts, each user should do the following from his/her workstation: a. Run Control Panel, and choose the Fonts icon. b. Choose the Add button and select the Windows shared directory. c. Choose the Select All button, and then the OK button. Note the following: - You may want to clear the Copy To The Windows Directory check box to have the *.TTF files remain on the server. Regardless of the box, the *.FOT files are copied into the user directory. - If you receive the following error messages, then you do not have full rights to the directory that contains the fonts: Cannot Change properties of the file named ". Setup program file has been modified or corrupted. - The following warning message is normal when using TrueType fonts from a network drive: The specified path points to a font file that may not be available during later Windows sessions. One or More Workstations Have Access 1. Use Windows 3.1's EXPAND.EXE to decompress all the .TT_ files into a TTFONTS directory. (EXPAND.EXE is on disk 3 for 3.5-inch 1.44 MB and 5.25-inch 1.2 MB disks. The fonts are on disks 4 and 5 of the 3.5-inch 1.44 MB disks, and on disks 5 and 6 of the 5.25-inch 1.2 MB disks.) Type the following: c:\windows\expand a:\*.tt_ x:\ttfonts 2. Change to the X:\TTFONTS directory and rename all the *.TT_ files to *.TTF. rename *.tt_ *.ttf 3. Run Windows on the workstation. 4. Run Control Panel, and choose the Fonts icon. 5. Choose the Add button and select the TTFONTS directory. 6. Clear the Copy To Windows Directory check box. 7. Choose the Select All button, and then the OK button. 8. Repeat for other workstations that are licensed to use these fonts. If you want to control access to the fonts, change the network rights needed to get to the TTFONTS directory. Consult your network manual for the procedure. You can also substitute your user directory or local hard drive instead of the TTFONTS directory on the server. Additional query words: 3.10 DSHELL.DLL rights true type gpf gp ====================================================================== Keywords : Technology : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311 Version : WINDOWS:3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.