DOCUMENT:Q108700  24-SEP-1999  [win3x]
TITLE   :ODIHLP.EXE Load Error Messages
PRODUCT :Microsoft Windows 3.x Retail Product
PROD/VER:WINDOWS:3.11
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows for Workgroups version 3.11 
-------------------------------------------------------------------------------

SYMPTOMS
========

This article lists error messages generated by ODIHLP.EXE when it is loaded out
of sequence.

 - The ODIHLP.EXE may produce the following error message if it is loaded before
   the link support layer (LSL.COM):

   ERROR: cannot load LSL
   ODI/NDIS3 Mapper: Initialization failure
   Press any key to continue

 - The ODIHLP.EXE file may produce the following error message if it is loaded
   after LSL.COM and before the multiple link interface driver (MLID):

   ERROR: not bound to any boards
   ODI/NDIS3 Mapper: Initialization failure
   Press any key to continue

In both the above scenarios, when you start Windows for Workgroups 3.11, a
text-based and a Windows-based error message appear:

The following text-based error message appears when the SYSTEM.INI file is read:

   ERROR: MSODISUP failed to load.
   ODIHLP.EXE must be loaded before starting Windows,
   ODIHLP.EXE should be loaded in AUTOEXEC.BAT after LSL.COM
   Cannot load a device that is specified in SYSTEM.INI.

   The performance of Windows should not be affected without this file.
   C:\WINDOWS\SYSTEM\MSODISUP.386
   Press a key to continue

The Windows-based STOP error message that appears is:

   Networking functionality will not be available. Your network adapter or
   protocols may not be configured properly. Run Network Setup to check adapter
   and protocol settings.

RESOLUTION
==========

To avoid these errors, ODIHLP.EXE must be loaded after LSL.COM and the MLID.

MORE INFORMATION
================

ODIHLP.EXE is the real-mode component that allows LSL to complete its binding
process in real mode (similar to NDISHLP.SYS). This file hooks all the real-mode
entry points so that MSODISUP.386 can use this information when working in
protected mode.

ODIHLP.EXE acts as a default stack for all frame types (that is, ODIHLP accepts
any packet that is of one of the frame types listed in the NET.CFG file.

Additional query words: 3.11

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbWFWSearch kbWFW311
Version           : WINDOWS:3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.