DOCUMENT:Q76850  26-SEP-1999  [win3x]
TITLE   :README.TXT: Using HIMEM.SYS
PRODUCT :Microsoft Windows 3.x Retail Product
PROD/VER::1.0
OPER/SYS:
KEYWORDS:

======================================================================
1.00

WINDOWS

kbref

-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows with Multimedia Extensions, version 1.0 
-------------------------------------------------------------------------------

SUMMARY
=======

The following information is contained in the Windows with Multimedia Extensions
version 1.0 README.TXT file. The Setup program copies this file to the Windows
with Multimedia Windows directory.

This information does not apply to later versions of Windows.

MORE INFORMATION
================

Using HIMEM.SYS
---------------

HIMEM.SYS is a driver required by Windows 3.0 for using extended
memory. It must be included in your CONFIG.SYS file. The method HIMEM
uses to access extended memory depends on your hardware.

When you boot your computer, HIMEM is loaded from your CONFIG.SYS
file. After it is loaded, you will see a message like the following
telling you the method HIMEM will use to access extended memory on
your computer.

  Installed A20 handler number X.

where X is 1 through 8 which corresponds to one of the following
methods:

      Number   Name               Computer type
  --------------------------------------------------------------
        1        at               ; IBM AT or 100% compatible.
        2        ps2              ; IBM PS/2
        3        ptlcascade       ; Phoenix Cascade BIOS
        4        hpvectra         ; HP Vectra (A & A+)
        5        att6300plus      ; AT&T 6300 Plus
        6        acer1100         ; Acer 1100
        7        toshiba          ; Toshiba 1600 & 1200XE
        8        wyse             ; Wyse 12.5 Mhz 286

If HIMEM does not work properly, you can try a different method.
Specify the switch for your computer type on the device=HIMEM.SYS line
in your CONFIG.SYS file. Computer type corresponds to either the
number or the name of your computer from the table.

For example the following lines are equivalent:

  device=c:\himem.sys /M:ps2
  device=c:\himem.sys /M:2

This entry forces HIMEM to use the IBM PS/2 A20 method for
accessing extended memory.

Additional query words: MMWIN kbmm readme

======================================================================
Keywords          :  
Technology        : kbWinMultiXSearch kbWinMultiX100
Version           : :1.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.