DOCUMENT:Q109502 22-SEP-1999 [win3x] TITLE :README.WRI from Windows for Workgroups 3.11 (Part 1 of 4) PRODUCT :Microsoft Windows 3.x Retail Product PROD/VER:WINDOWS:3.11 OPER/SYS: KEYWORDS: ====================================================================== 3.11 WINDOWS kbref kbdisplay kbsound ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows for Workgroups version 3.11 ------------------------------------------------------------------------------- SUMMARY ======= The following information was taken from the Microsoft Windows for Workgroups version 3.11 README.WRI file. Note that this article reflects the text of a static document. Therefore, some of the information in this article may be outdated. For example, as of May 20, 1996, Microsoft no longer maintains support forums on CompuServe. MORE INFORMATION ================ More Information About Microsoft Windows for Workgroups Version 3.11 ____________________________________________________________________ This document contains important information not available in the printed documentation or in online Help. For additional information about Microsoft Windows for Workgroups, see "Other Online Documents" at the end of this document. Note: If you plan to use a terminate-and-stay-resident (TSR) program with Windows for Workgroups, please read the SETUP.TXT online document first. It contains important information about running TSR programs with Windows for Workgroups and the Setup program. Contents This document contains information about the following topics: 1.0 Running Windows for Workgroups with an Operating System Other Than the Microsoft MS-DOS Operating System 2.0 Preventing Stack Overflow 3.0 Using 32-Bit Disk Access and File Access 3.1 Using 32-Bit Disk Access with Portable Computers 3.2 Using 32-Bit File Access with DoubleSpace 3.3 Networks You Cannot Use 32-Bit File Access With 4.0 Using Memory Managers and Vshare 4.1 Using 386MAX 4.2 Turning On Sharing Popup with Vshare 4.3 If EMM386 Detects an Error in an Application 5.0 Using Advanced Power Management (APM) 6.0 Using SMARTDrive Version 5.0 6.1 Accessing Floppy Disk Drives on Older COMPAQ DESKPROS 6.2 Using SMARTDrive with Double Buffering 6.3 Using SMARTDrive with Norton Utilities Version 6.0 Disk Monitor 6.4 Using SMARTDrive with SuperStor Disk-Compression Utility 6.5 Using SMARTDrive with Copy-Protected Games and Applications 7.0 Using Multimedia Extensions Version 1.0 with Windows for Workgroups 7.1 Upgrading to Windows for Workgroups 7.2 Configuring MIDI Setups 7.3 Configuring Your Display 7.4 Sample MIDI File 7.5 Using HyperGuide 7.6 Using Music Box 7.7 Using Alarm Clock 8.0 Running Specific MS-DOS-based Applications 8.1 Creative Labs JukeBox 8.2 Games or Timing-Sensitive Applications 8.3 Third-Party Expanded-Memory Emulators with MS-DOS Version 5.0 or 6.0 8.4 PC Tools Applications 8.5 WordPerfect Version 5.1 8.6 3270-Emulation Applications 8.7 C/C++ Version 7.0 9.0 Running Communications Applications 9.1 Guidelines 9.2 Using Intel CAS Modems with 32-Bit File Access 10.0 Using Specific Display Adapters with Windows for Workgroups 10.1 Installing Display Adapters by Following the Manufacturer's Instructions 10.2 Upgrading Display Drivers When Using Soft-Font Packages 10.3 Using Self-Configuring Display Adapters 10.4 LCD 10.5 Super VGA 10.6 Third-Party Display Drivers: Running MS-DOS-based Applications 10.7 VGA-Compatible 10.8 Video Seven: Using 256-Color Support 10.9 WinSpeed 10.10 IBM XGA: Configuring Color and Resolution 10.11 IBM XGA: Using EMM386 11.0 Using Specific Mice with Windows for Workgroups 11.1 Microsoft Mouse 11.2 Genius Mouse 11.3 Logitech Mouse 11.4 Logitech Cordless Mouse 11.5 Logitech or Microsoft BallPoint Mouse on a Toshiba T2200SX 11.6 Mouse Systems Mouse on PS/2 Ports 12.0 Using Additional Hardware Configurations with Windows for Workgroups 12.1 CD-ROM Drives 12.2 EISA Systems with More Than 16 Megabytes of Extended Memory 12.3 Epson Screen Savers 12.4 NCR 925 with EMM386.EXE 12.5 Non-US Keyboard Layouts: Using Application Shortcut Keys 12.6 Plus Hardcard 12.7 SCSI Hard Disk Using DMA 12.8 Columbia Data Products SCSI Hard-Disk Controller 12.9 Sound Blaster Audio Card 12.10 Tandy 2500 XL with MS-DOS in ROM 12.11 Wyse Computers 13.0 Using Microsoft At Work PC Fax 13.1 Sending Faxes From Applications 13.2 Cancelling a Fax 13.3 Different Fax Appearance 13.4 Use Correct Image Quality When Sending Faxes 13.5 Working Offline When Fax Transport Can't Be Started 13.6 CPU-Intensive Operations Can Cause Transmission Errors 13.7 Binary File Transfers 13.8 Fax Modem Information 14.0 Security 15.0 Using the Real-Mode Redirector 16.0 Quitting Windows for Workgroups When Microsoft Mail is Still Running 17.0 Other Online Documents 18.0 Ordering the Resource Kits 19.0 Getting Drivers from the Windows Driver Library Microsoft and MS-DOS are registered trademarks and Windows is a trademark of Microsoft Corporation. SuperStor is a trademark of AddStor, Inc. Bitstream is a registered trademark and FaceLift is a trademark of Bitstream, Inc. PC Tools is a trademark of Central Point Software, Inc. CompuServe is a registered trademark of CompuServe, Inc. COMPAQ DESKPRO 386/20 is a registered trademark of Compaq Computer Corporation. Sound Blaster is a trademark of Creative Technology Ltd. Hewlett-Packard is a registered trademark of Hewlett-Packard Company. Intel is a registered trademark of Intel Corporation. PS/2 and XGA are registered trademarks of International Business Machines Corporation. Toshiba is a registered trademark of Kabushiki Kaisha Toshiba. Logitech is a trademark of Logitech, Inc. Pocket Modem is a registered trademark of Migent, Inc. NEC is a registered trademark of NEC Corporation. Norton Utilities is a registered trademark of Peter Norton Computing Hardcard is a trademark of Plus Development Corporation. 386MAX is a registered trademark of Qualitas, Inc. Qemm is a trademark of Quarterdeck Office Systems. SCSI is a registered trademark of Security Control Systems, Inc. Epson is a registered trademark of Seiko Epson Corporation, Inc. Tandy is a registered trademark of Tandy Corporation. UNIX is a registered trademark of UNIX Systems Laboratories. WordPerfect is a registered trademark of WordPerfect Corporation. Wyse is a registered trademark of Wyse Technology. Zenith is a registered trademark of Zenith Electronics Corporation. 1.0 Running Windows for Workgroups with an Operating System Other Than the Microsoft MS-DOS Operating System Microsoft Windows for Workgroups and MS-DOS work together as an integrated system. They were designed together and extensively tested together on a wide variety of computers and hardware configurations. Running Windows for Workgroups with an operating system other than MS-DOS could cause unexpected results or poor performance, and is not supported by Microsoft. 2.0 Preventing Stack Overflow Stacks are temporary data structures that MS-DOS and applications use for processing hardware events. If, while setting up Windows for Workgroups, the Setup program detects hardware or software that requires a certain stack size, Setup places the following command line in your CONFIG.SYS file: stacks=9,256 This should be sufficient most of the time. However, if you receive the "Internal Stack Overflow" message, first try increasing the second number on the stacks= command line. If that doesn't work, try increasing the first number. For more information about the stacks setting and modifying the CONFIG.SYS file, see your MS-DOS documentation. 3.0 Using 32-Bit Disk Access and File Access This section includes information about using 32-bit disk access and file access with portable computers, DoubleSpace, and networks. 3.1 Using 32-Bit Disk Access with Portable Computers By default, 32-bit disk access is turned off to prevent disk errors on some battery-powered portable computers. However, 32-bit disk access may run correctly with some battery-powered portable computers, such as the Zenith MasterSport SL. If you want to try using 32-bit disk access, select the Use 32-bit Disk Access check box in the expanded Virtual Memory dialog box (choose the Enhanced option in Control Panel). For more information, see Chapter 8, "Customizing Network Settings and Improving Performance," in the Microsoft Workgroup Add-On "User's Guide." Caution: Before you use 32-bit disk access on a battery-powered portable computer, it is highly recommended that you back up your hard disk. Because 32-bit disk access has not been fully tested on all battery-powered systems, you may receive disk errors while using it. 3.2 Using 32-Bit File Access with DoubleSpace You cannot use 32-bit file access with MS-DOS version 6.0 if you have DoubleSpace enabled. To use 32-bit file access with DoubleSpace, use MS-DOS version 6.2. 3.3 Networks You Cannot Use 32-Bit File Access With A driver that is necessary for 32-bit file access is incompatible with some networks, including Artisoft LANtastic and Microsoft LAN Manager. If you are running one of these networks with Windows for Workgroups instead of the Microsoft Windows Network, remove the device=c:\windows\ifshlp.sys line from your CONFIG.SYS file. Then turn off 32-bit file access by using the Enhanced icon in Control Panel. If you remove the IFSHLP.SYS device driver line from CONFIG.SYS, you will not be able to share files or printers. You may also not be able to use 32-bit disk access. 4.0 Using Memory Managers and Vshare This section describes problems you may encounter while using memory managers and the VSHARE.386 file-sharing/file-locking program with Windows for Workgroups. 4.1 Using 386MAX If you are running 386MAX with Windows for Workgroups, note the following: - Do not use options that limit the EMS swap region in the upper memory area. If you include exclude= options on the 386max or bluemax command line or in the .PRO file (usually called 386MAX.PRO), make sure that the address range specified does not extend beyond A000. If the address range extends beyond A000, Windows for Workgroups may not run properly. For example, the command exclude=1800-A000 is acceptable, but the command exclude=1800-B800 is not. If you must exclude an address range above A000, use the RAM= option instead. For more information about this and other options, see your 386MAX documentation. - Do not load SMARTDrive when QCache is running. Note: The 386MAX setup program does not detect SMARTDrive version 5.0 and may recommend that you install QCache. - If you update an earlier version of 386MAX to version 6.0, the 386MAX version 6.0 setup program may not remove the load=windows.lod line from your .PRO file. You can remove this line manually. It is not needed, and removing it will free a small amount of memory. - If you remove the net start command line from your AUTOEXEC.BAT file, Windows may lock up during startup. 4.2 Turning On Sharing Popup with Vshare VSHARE.386 is a file-sharing and file-locking program that is used when running Windows for Workgroups with file or print sharing enabled. With VSHARE, when a file-sharing violation occurs, you see an "Access denied" message, instead of the "Sharing violation on drive..." message used when file and print sharing are not enabled. Some MS-DOS-based applications may need the sharing-violation message. If you need to turn on this message, add the following line to the [386Enh] section of your SYSTEM.INI file: EnableSharingPopups=TRUE For more information about modifying the SYSTEM.INI file, see the SYSINI.WRI online document. 4.3 If EMM386 Detects an Error in an Application If EMM386 displays a message such as "EMM386 has detected error #12 in an application," this indicates that the processor has reported an exception error to EMM386. An exception error typically occurs when an application gives the processor an instruction under invalid or unexpected conditions. In most cases, these errors are related to a specific program. If you are receiving an error that does not occur with any particular application, the error might be caused by a device driver or a memory-resident (terminate-and-stay-resident) program. To avoid these errors: - Try to identify the program involved. One way to do this is to see if the error occurs when the program is not running. If you suspect a memory-resident program or device driver, try bypassing it when your computer starts. - Try disabling EMM386. If a particular application is to blame, disabling EMM386 might allow that application to generate an error message. Disabling EMM386 might also change your memory configuration so that the error no longer occurs. Since most of Windows for Workgroups version 3.11 and most Windows applications use protected-mode memory, and EMM386 manages conventional memory, EMM386 may not save any memory. - Try changing the order in which you load device drivers and memory-resident programs. This might help because some errors occur only under specific memory conditions. - If error 12 is occurring, this indicates that a stack is being used incorrectly. Try adding the following command to your CONFIG.SYS file: STACKS=18,512 - If error 13 is occurring, the program may be trying to use protected mode without cooperating with EMM386. You may need to obtain a VCPI-compliant version of the program, or not load EMM386 when using this application. 5.0 Using Advanced Power Management (APM) Windows for Workgroups includes support for Advanced Power Management (APM). This enables Windows to extend battery life, display power-status information, and work with the suspend features of battery-powered personal computers. To find out if your computer supports APM, contact your computer manufacturer. To install APM on your system: 1. Quit Windows for Workgroups. 2. Run Windows for Workgroups Setup and select one of the following system types: - MS-DOS System with APM - Intel 386SL Based System with APM (if your computer has an Intel 386SL processor and supports the SL Enhanced Options for APM) 3. Restart Windows for Workgroups. A Power icon appears in the Control Panel window. 4. Choose the Power icon to configure power-management settings. For more information about the settings, choose the Help button or press F1 while using the Power Management dialog box. Additional query words: dblspace awfax wfw wfwg 3.11 ====================================================================== Keywords : Technology : kbAudDeveloper kbWFWSearch kbWFW311 Version : WINDOWS:3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.