DOCUMENT:Q109504 25-SEP-1999 [win3x] TITLE :README.WRI from Windows for Workgroups 3.11 (Part 3 of 4) PRODUCT :Microsoft Windows 3.x Retail Product PROD/VER:WINDOWS:3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows for Workgroups version 3.11 ------------------------------------------------------------------------------- SUMMARY ======= The following information was taken from the Microsoft Windows for Workgroups version 3.11 README.WRI file. MORE INFORMATION ================ 10.2 Upgrading Display Drivers When Using Soft-Font Packages If you are using certain soft-font packages, including Bitstream Facelift, Publisher PowerPak, and Hewlett-Packard Intellifont, Setup may not update your display driver when you upgrade to Windows for Workgroups. In this case, you need to update your display driver after you have set up Windows for Workgroups. To update your display driver after you have set up Windows for Workgroups: 1. From the Main group, run Windows Setup. 2. Choose Change System Settings from the Options menu. 3. From the list of Display options, select the display drivers you want to use. For more information about using Setup after you have installed Windows, see "Configuring Hardware" in your Windows or Windows for Workgroups user's guide. 10.3 Using Self-Configuring Display Adapters Some display adapters can change their configurations to match what an application tries to do. For example, if an application tries to use a video graphics adapter (VGA) configuration and your display adapter is currently configured as an enhanced graphics adapter (EGA), the adapter can switch from an EGA configuration to a VGA configuration. This type of display adapter makes use of nonmaskable interrupts (NMIs) to change its configuration while you work. To use this type of display adapter, you must disable the NMI (also called self-configuring, auto-switching, or auto-emulating) option after you configure the display adapter. For more information, see your display-adapter documentation. 10.4 LCD If you use an LCD screen, set it for white text on a black background instead of black text on a white background. When Windows is running, black text on a white background wears out LCD screens. See the documentation for your screen for instructions on how to do this. 10.5 Super VGA If you are using a video card and monitor (NEC MultiSync 3D/4D/5D or other multifrequency monitor) capable of 800x600, 16-color resolution with a third-party Super VGA driver, use the Super VGA (800x600, 16 colors) driver provided with Windows for Workgroups instead. If you do not update your driver, Windows may not work properly. To install the Windows for Workgroups Super VGA driver, run Windows Setup from the Main group, and then select "Super VGA 800x600, 16 colors" from the list of Display options. For more information about using Setup after you have installed Windows for Workgroups, see your user's guide. Super VGA VESA Mode 6Ah Some Super VGA adapters support higher monitor-refresh rates at 800x600 resolution with a special VESA mode. If both your video adapter and monitor support a higher refresh rate and if you are using the Super VGA driver, you may be able to get better video results by including the following setting in the [display] section of the SYSTEM.INI file: svgamode=106 If you encounter problems using this mode, delete this setting from the SYSTEM.INI file, and then restart Windows for Workgroups. 10.6 Third-Party Display Drivers: Running MS-DOS?Based Applications If you are using a display driver that is not provided with Windows for Workgroups and you receive one of the following messages while trying to run a MS-DOS?based application: "Incorrect system version. Run the Windows Setup program again." or "386 System display type mismatch." Run Setup again, and if that doesn't work, contact your display manufacturer for an updated driver. 10.7 VGA-Compatible Most VGA-compatible display-adapter cards and main-adapter chips use additional memory to enhance their performance. When Windows is configured for VGA, Windows detects most of these cards and automatically excludes the additional memory. However, if you have an enhanced VGA that Windows does not recognize, you must exclude the additional memory yourself by adding the following line to the [386Enh] section of the SYSTEM.INI file: emmexclude=C400-C7FF For more information about modifying the SYSTEM.INI file, see the SYSINI.WRI online document. 10.8 Video Seven: Using 256-Color Support Windows for Workgroups provides 256-color support at several resolutions for Video Seven display adapters that have at least 512K of video memory. The following table shows the Video Seven 256-color modes that are supported by the display drivers provided with Windows for Workgroups. Model 640x480 720x512 800x600 1024x768 ____________________________________________________________ FastWrite 512K Yes 1024i 512K Yes VRAM 512K Yes Yes VRAM II 512K Yes Yes VRAM II 1MB Yes Yes Yes Yes If you are using a Video Seven display adapter that has at least 512K of video memory, you should use one of these display drivers. These drivers take full advantage of the performance improvements and mouse support in MS- DOS?based applications. To install one of the drivers, run Windows Setup from the Main group, and then select the driver you want from the list of Display options. For more information about using Setup after you have installed Windows, see "Configuring Hardware" in your Windows or Windows for Workgroups user's guide. Note: Windows for Workgroups does not include drivers for the new Video Seven display adapters that are based on Headland Technology/Video 7 HT216, HT216-32, or HT217. If you have one of these display adapters, Setup automatically installs a VGA driver. Your display-adapter package may include an updated driver, which you can install by using the instructions included in the package. If no updated driver is included, you can obtain one by contacting your display-adapter vendor. 10.9 WinSpeed The WinSpeed version 1.0 installation program, INSTALL.EXE, does not work properly with Windows for Workgroups. It copies an incompatible version of the SETUP.INF file to your Windows directory. To install WinSpeed for use with Windows for Workgroups, you must get updated installation disks from Panacea. If you have already used the INSTALL.EXE program to install the WinSpeed drivers on your system, the following message appears when you try to run Windows Setup from the Main group: "The SETUP.INF file on your system is not valid for use with this version of Setup." To correct this problem: 1. If there is a SETUP.INF file in your Windows directory, delete it. (The SETUP.INF file should never be in your Windows directory.) 2. Copy the SETUP.INF file on Windows for Workgroups version 3.11 Disk 1 to your Windows SYSTEM directory. 3. Contact Panacea, Inc. for updated WinSpeed installation disks that are compatible with Windows for Workgroups, and then use these to reinstall WinSpeed. 10.10 IBM XGA: Configuring Color and Resolution Windows Setup automatically configures an IBM XGA for 16-color, 640x480 resolution. If your monitor can support 256 colors or higher resolutions, you can configure your XGA to use the color and resolution settings you want. To do this, run Windows Setup from the Main group, and then select one of the following drivers from the list of Display options: - XGA (640x480, 16 colors) This is the default setting and should not be changed if you are using the plasma screen on the PS/2 model 75. - XGA (640x480, 256 colors) - XGA (Small fonts) - XGA (Large fonts) Both the Small and Large fonts settings configure the XGA for 1024x786 resolution and 256 colors, if your monitor supports it. Otherwise, these settings configure your display for 640x480 resolution. Select Small Fonts if you have a large monitor (at least 16 inches) or want to fit more information on your screen. Select Large Fonts if you want to improve the readability of text. Make sure that your monitor supports the XGA configuration you select. If it does not, you will return to the MS-DOS prompt when you try to start Windows for Workgroups. For more information about using Setup after you have installed Windows, see "Configuring Hardware" in your Windows or Windows for Workgroups user's guide. 10.11 IBM XGA: Using EMM386 To use the IBM XGA display adapter successfully with the EMM386 expanded-memory emulator, you need to manually prevent EMM386 from using the memory address range used by the XGA display. A common range is C600-C7FF. To prevent the memory manager from using this range, include the X= option on the device=EMM386.EXE line in your CONFIG.SYS file, as follows: device=EMM386.EXE X=C600-C7FF To identify the exact range that your XGA display adapter uses, run the System Configuration Program on the System Reference Disk for your Personal System/2 (PS/2), and select "Display Memory Map." With some PS/2 model 75 plasma screens, or with XGA display adapters configured for 640x480 resolution and 16 colors, you must also include the NOEMS or RAM option on the device=EMM386.EXE line in your CONFIG.SYS file. For example: device=EMM386.EXE NOEMS X=C600-C7FF Do not include the i=B000-BE00 option on the device=EMM386.EXE line in your CONFIG.SYS file. This address range is used by the XGA when running Windows. Therefore, it cannot be used as upper memory area. Windows will not recognize XGA configurations if EMM386 is using this address range. For more information about modifying your CONFIG.SYS file, see your MS-DOS documentation. For more information about installing the EMM386 expanded-memory emulator and configuring the way it uses memory, see "Managing Memory and Performance" in your Windows or Windows for Workgroups user's guide. 11.0 Using Specific Mice with Windows for Workgroups This section describes some problems you may encounter using specific types of mice with Windows for Workgroups. 11.1 Microsoft Mouse Windows for Workgroups includes version 8.20 of the Microsoft mouse drivers. If you have a Microsoft mouse, Setup installs the Windows mouse driver (MOUSE.DRV) in your Windows SYSTEM directory and an MS-DOS mouse driver (MOUSE.COM or MOUSE.SYS) in your Windows directory. If you have additional versions of the Microsoft mouse drivers on your system, make sure that you are using the mouse drivers provided with Windows for Workgroups. If you use the Microsoft Mouse Control Panel version 8.0 or later, you need to set your MS-DOS mouse variable to the directory on your hard disk that contains the control-panel program files POINT.EXE and PANEL.COM. You can do this by modifying your AUTOEXEC.BAT file. For example, if the control-panel program files are located in the \MOUSE directory, you would add the following line to your AUTOEXEC.BAT file: set mouse=c:\mouse This ensures that the mouse settings are stored in the MOUSE.INI file located in the specified directory. If the mouse variable is not set correctly, you may experience problems with mouse acceleration and other mouse settings. It is recommended that you use the mouse driver MOUSE.COM instead of MOUSE.SYS, and that you load MOUSE.COM from your AUTOEXEC.BAT file. If you use MOUSE.SYS, you may encounter problems saving MS-DOS mouse control-panel settings. If you must use MOUSE.SYS and you encounter problems saving mouse settings, make sure you load the driver from your mouse directory instead of from your Windows directory. For more information about installing the mouse drivers, see your Windows or Windows for Workgroups user's guide. 11.2 Genius Mouse If you are using a Genius mouse and are running MS-DOS?based applications, the mouse may not work properly, especially if you have several MS-DOS?based applications running at the same time. To correct this problem, add the following line to the [386Enh] section of your SYSTEM.INI file: local=PC$MOUSE For more information about changing settings in the SYSTEM.INI file, see the SYSINI.WRI online document. 11.3 Logitech Mouse - Some Logitech mouse models are detected as "Microsoft or IBM PS/2" mouse models by the Setup program. In this case, Setup installs the mouse driver for the Microsoft or IBM PS/2 mouse. If you have a Logitech mouse, you should use the Logitech mouse driver instead. To install the Logitech mouse driver, run Windows Setup from the Main group, and then select Logitech from the list of Mouse options. For more information about using Setup after you have installed Windows, see "Configuring Hardware" in your Windows or Windows for Workgroups user's guide. - When installing the Logitech mouse driver, Windows Setup copies the LMOUSE.COM file to your Windows directory. This is the mouse driver that is required in order to use the Logitech mouse with MS-DOS?based applications. To use your mouse with MS-DOS?based applications, you need to load LMOUSE.COM before you start Windows. You can do this by adding it to your AUTOEXEC.BAT file. You also need to add the following line to the [386Enh] section of your SYSTEM.INI file: local=PC$MOUSE 11.4 Logitech Cordless Mouse If you have a Logitech Cordless mouse, you may encounter problems, such as an unresponsive pointer, when you are running the MS-DOS Prompt or MS-DOS?based applications in a window. To correct this problem: 1. Change the baud-rate setting for the mouse driver. To do this, add the following line to the [LogiMouse] section of the SYSTEM.INI file: BaudRate=1200 2. Include the 1200 option in the command line that loads the MS-DOS Logitech mouse driver (which is provided with Windows for Workgroups) as follows: LMOUSE 1200 3. Add the above line to your AUTOEXEC.BAT file to load the mouse driver each time you start your system. The next time you start Windows for Workgroups, your mouse should work correctly. For more information about changing settings in the SYSTEM.INI file, see the SYSINI.WRI online document. 11.5 Logitech or Microsoft BallPoint Mouse on a Toshiba T2200SX If you are using a Toshiba T2200SX computer with a BIOS version earlier than 1.20 and you have a Logitech or Microsoft ballpoint mouse connected to the PS/2 mouse port, you may have problems moving the mouse pointer. If the mouse does not respond, try connecting your mouse to the serial port instead, or contact Toshiba for an upgraded version of the BIOS. 11.6 Mouse Systems Mouse on PS/2 Ports The "Mouse Systems" serial and bus mouse drivers provided with Windows do not support a Mouse Systems mouse when it is connected to a PS/2-style mouse port. If you are using a Mouse Systems mouse connected to a PS/2-style mouse port, Setup installs the "Microsoft or IBM PS/2" mouse driver for you. This is the correct driver. Do not change it. 12.0 Using Additional Hardware Configurations with Windows for Workgroups This section contains information about using Windows for Workgroups with different types of computers and hardware configurations. 12.1 CD-ROM Drives - If you are using a CD-ROM drive, you should use version 2.23 of Microsoft MS-DOS CD-ROM Extensions (MSCDEX), the version shipped with Windows for Workgroups version 3.11, with all configurations of CD-ROM drives. If you have upgraded from Windows version 3.1 or Windows for Workgroups version 3.1, you must remove the following setting from the [386Enh] section of the SYSTEM.INI file: device=LANMAN10.386 This setting can cause some CD-ROM drives to timeout and fail with versions later than 2.20 of MSCDEX. However, if you must use a version earlier than 2.20 of MSCDEX, the above setting is required in the [386Enh] section of your SYSTEM.INI file. For more information about changing settings in the SYSTEM.INI file, see the SYSINI.WRI online document. - If a CD-ROM drive causes instability in your system or causes your system to fail, you may need to update the CD-ROM driver. Also, the MCI (Media Control Interface) driver MCICDA.DRV may not work properly with older CD-ROM drivers. Contact your CD-ROM-drive manufacturer about obtaining an updated driver. Additional query words: wfw wfwg 3.11 ====================================================================== Keywords : Technology : kbAudDeveloper kbWFWSearch kbWFW311 Version : WINDOWS:3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.