DOCUMENT:Q116254 30-SEP-1999 [win3x] TITLE :System File Changes Installing Xircom CE10 Ethernet Adapter PRODUCT :Microsoft Windows 3.x Retail Product PROD/VER:WINDOWS:3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows for Workgroups version 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article lists the changes made to your SYSTEM.INI, AUTOEXEC.BAT, and CONFIG.SYS files when you install the Xircom CE10 Credit Card Ethernet adapter. It also discusses the PROTOCOL.INI file that Setup creates for this adapter. MORE INFORMATION ================ AUTOEXEC.BAT ------------ C:\WINDOWS DIRECTORY\NET START CONFIG.SYS ---------- Device=C:\WINDOWS DIRECTORY\IFSHLP.SYS SYSTEM.INI ---------- [BOOT] network.drv=WFWNET.DRV [BOOT.DESCRIPTION] network.drv=Microsoft Windows Network (version 3.11) [386ENH] network=*vnetbios, *vwc, vnetsup.386, vredir.386, vserver.386 netheapsize=20 netmisc=ndis.386, ndis2sup.386 transport=nwlink.386, nwnblink.386, netbeui.386 InDOSPolling=FALSE [NETWORK] winnet=wfwnet/00025100 Username=username Workgroup=workgroup ComputerName=computername [NETWORK DRIVERS] devdir=C:\windows directory LoadRMDrivers=YES netcard=cendis.exe transport=ndishlp.sys,*netbeui [NWBLINK] lanabase=1 PROTOCOL.INI File ----------------- [NETWORK SETUP] version=0x3110 netcard=cendis,1,CENDIS,1 transport=ms$nwlinknb,NWLINK transport=ms$ndishlp,MSNDISHLP transport=ms$netbeui,NETBEUI lana0=cendis,1,ms$netbeui lana1=cendis,1,ms$nwlinknb lana2=cendis,1,ms$ndishlp [PROTMAN] Drivername=Protman$ Priority=MS$NDISHLP [CENDIS] Drivername=XIRCOM$ INT=10 (or other IRQ adapter configured for) IOADDRESS=0x300 (or other address configured for) MEM=0xC800 (or other starting memory address configured for) IOWORDSIZE=16 SOCKET=1 (socket that lan adapter installed in) [NWLINK] Bindings=CENDIS [MS$NDISHLP] Drivername=ndishlp$ BINDINGS=CENDIS [NETBEUI] Drivername=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=CENDIS Lanabase=0 PROTOCOL.INI ------------ Setup also creates a PROTOCOL.INI file when you install the Xircom adapter.(If PROTOCOL.INI already exists, Setup modifies it.) Sometimes the PROTOCOL.INI settings do not match the CONFIG.SYS settings for the Credit Card adapter, which causes it to fail. If this happens, compare your PROTOCOL.INI settings with the relevant CONFIG.SYS lines and modify any inconsistent settings. Additional query words: 1.00 3.11 Xircom PCMCIA CE10 creditcard ====================================================================== Keywords : Technology : kbAudDeveloper kbWFWSearch kbWFW311 Version : WINDOWS:3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.