DOCUMENT:Q88455 03-OCT-1999 [win95x] TITLE :Terminal Settings for Popular Online Services PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.0,3.0a,3.1,3.11 OPER/SYS: KEYWORDS:win31 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= This article documents the correct settings for Terminal to properly communicate with the following online services: - CompuServe - BIX - GEnie - TymNet - Most bulletin board services (BBSs) MORE INFORMATION ================ CompuServe ---------- To log on to CompuServe, do the following: 1. From the Settings menu, choose Terminal Emulation. 2. Choose DEC VT-100 (ANSI) and choose OK. 3. From the Settings menu, choose Communications. 4. Choose 7 Data Bits, Even Parity, and 1 Stop Bit. Choose OK. NOTE: CompuServe defaults to 7 data bits, which is not compatible with XModem file transfers. For this reason, you cannot use Terminal's XModem protocol to transfer files with CompuServe set at 7 data bits. After you set CompuServe to use 8 data bits, you can set up Terminal to use 8 data bits and no parity. With this setting, you can use XModem to transfer files with CompuServe. For information on how to set up CompuServe to use 8 data bits, contact CompuServe support (type go help at the CompuServe prompt). BIX ("BYTE" Magazine's Online Information eXchange Service) ----------------------------------------------------------- To log on to BIX, do the following: 1. From the Settings menu, choose Terminal Emulation. 2. Choose DEC VT-100 (ANSI) and choose OK. 3. From the Settings menu, choose Communications. 4. Choose 7 Data Bits, Even Parity, and 1 Stop Bit. Choose OK. GEnie (General Electric Network for Information Exchange) --------------------------------------------------------- To log on to GEnie, do the following: 1. From the Settings menu, choose Terminal Emulation. 2. Choose DEC VT-100 (ANSI) and choose OK. 3. From the Settings menu, choose Communications. 4. Choose 8 Data Bits, None Parity, 1 Stop Bit, Local Echo (from Terminal Preferences menu), and choose OK. TymNet ------ TymNet is a modem dial-in that provides access to Bank of America's Home Banking Service and other host services. To log on to TymNet, do the following: 1. From the Settings menu, choose Terminal Emulation. 2. Choose DEC VT-100 (ANSI) and choose OK. 3. From the Settings menu, choose Communications. 4. Choose 8 Data Bits, None Parity, 1 Stop Bit. If connection is established and text is not readable, use step 1 below to clear bad characters. If step 1 is not successful, use step 2. 1. After receiving a line of non-readable text, wait three seconds and then type a capital letter "A" (without the quotation marks). 2. Set modem parameters to 7 Data Bits, 1 Stop Bit, and Even Parity. Most BBSs --------- Most computer bulletin board services (BBSs) require communications settings of 8 data bits, no parity, and one stop bit. The Windows Terminal program defaults to these settings when first opened. Additional query words: 3.10 3.00a 3.00 3.11 timenet win31 ====================================================================== Keywords : win31 Technology : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a kbWin310 kbWin311 Version : WINDOWS:3.0,3.0a,3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.