DOCUMENT:Q82757 29-OCT-1999 [win95x] TITLE :Upgrade to 3.1 May Cause Printer Information to Reset PRODUCT :Microsoft Windows 95.x Retail Product PROD/VER:WINDOWS:3.1,3.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows versions 3.1, 3.11 ------------------------------------------------------------------------------- SUMMARY ======= After upgrading from Windows 3.0 to the Microsoft Windows operating system version 3.1, some printer device settings may not be retained. As a general rule, Microsoft recommends that customers reset their printer device mode settings via the Control Panel. To do this, select the Printers icon and then choose the Setup button. MORE INFORMATION ================ All dot matrix printer drivers will have their dialog boxes reset to the default. Also, printer model types may differ; for example, printer models Epson LQ 2550, Epson LX-810, and Epson LQ-510 will be upgraded as Epson LQ 2500, Epson LX-800, and Epson LQ-500, respectively. For PostScript and Hewlett-Packard (HP) LaserJet printers, most settings will be retained with the exceptions listed below: For all HP LaserJet and all PostScript printer drivers, the previous printer-memory settings, defined in Control Panel under the Printers icon, (choose Configure, then choose Setup,) will be returned to the default value. KBCategory: kbprint kbsetup KBSubcategory: win31 Additional query words: 3.10 3.11 3.1 LQ PSCRIPT HPPCL ====================================================================== Keywords : Technology : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311 Version : WINDOWS:3.1,3.11 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.