DOCUMENT:Q80552  02-NOV-1999  [win95x]
TITLE   :Windows 3.0 Enhanced Mode Problems with Site Lock 3.1
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:WINDOWS:3.0,3.0a
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows versions 3.0, 3.0a 
-------------------------------------------------------------------------------

SYMPTOMS
========

If you run Microsoft Windows 3.0 in enhanced mode, you may experience problems
printing and/or problems running the MS-DOS Prompt when you use Brightworks
Development Site Lock 3.1 with a Novell network. Symptoms include the
following:

 - When you try to print from Windows in enhanced mode, Windows may not print or
   may lock up while trying to print.

 - When you run the MS-DOS Prompt full-screen from Windows in enhanced mode, the
   following error message may appear:

   APPLICATION HAS VIOLATED SYSTEM INTEGRITY

WORKAROUND
==========

Printing
--------

Brightworks Development suggests the following workaround:

1. Run Control Panel, select Printers and choose Configure.

2. Change the printer port to LPT1.OS2.

3. Choose OK twice and exit the Control Panel.

NOTE: When you print with the Site Lock 3.1 utility, the LPTx.OS2
workaround/testing port is used. As a result, printouts may not be reliable when
you print graphics to non-PostScript printers.

Running the MS-DOS Prompt
-------------------------

To correct problems when you run MS-DOS Prompt, Brightworks Development suggests
that you do the following:

1. Use the PIF Editor to set up a PIF file for COMMAND.COM, as follows:

    - Under Display Usage, select Full Screen, and under Execution, select
      Exclusive.

      -or-

    - Under Display Usage, select Windowed, and under Execution, select
      Background.

2. Contact Novell to obtain the latest version of the file VNETWARE.386. This
   file is also available on CompuServe in the Novell forum.

MORE INFORMATION
================

Site Lock is a TSR (terminate-and-stay-resident) program that monitors software
usage over a network. Site Lock can be installed in the network login script.

The products included here are manufactured by vendors independent of Microsoft;
we make no warranty, implied or otherwise, regarding these products' performance
or reliability.

Additional query words: 3.00 Site Lock print application 3.0a DOS monitor 3.00a

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin300 kbWin300a
Version           : WINDOWS:3.0,3.0a

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.