DOCUMENT:Q84564  09-OCT-1999  [win95x]
TITLE   :Windows Err Msg: Setup Error #S019. Cannot Create... WIN.COM
PRODUCT :Microsoft Windows 95.x Retail Product
PROD/VER:WINDOWS:3.1,3.11
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows versions 3.1, 3.11 
-------------------------------------------------------------------------------

SYMPTOMS
========

You may receive the following error message while attempting to perform a

   Setup Error #S019
   Setup cannot create the file WIN.COM, which it needs to set Windows up. Setup
   cannot continue.

CAUSE
=====

Either of the following may cause this error:

 - You are trying to run Setup from the Windows 3.1 floppy disks by using the /N
   switch.

   -or-

 - You are using Novell NetWare and have not regenerated IPX.COM from the
   IPX.OBJ file included with Windows 3.1. For more information on regenerating
   the IPX.COM file, please see section 2.10 of the NETWORKS.WRI file.


MORE INFORMATION
================

Running Setup /N from the Floppy Disks
--------------------------------------

Setup /N was designed to be run from a network installation of Windows 3.0, 3.0a,
or 3.1. The above error message will appear when running Windows 3.1 Setup from
a floppy disk using "Setup /N" (without the quotation marks) or "NETSETUP=TRUE"
(without the quotation marks) in the [Data] section of the SETUP.INF file.
NETSETUP=TRUE Setup will automatically perform a network setup.

The Setup /N command must be performed from the Windows 3.1 shared directory on
the file server, as explained on page 8 of the "Getting Started with Microsoft
Windows" manual for version 3.1. Page 9 of the "Getting Started with Microsoft
Windows" manual outlines the procedure to place the Windows files on the file
server.

Regenerating IPX.COM from IPX.OBJ
---------------------------------

If you are using Novell NetWare, you must regenerate the IPX.COM file for each
computer where you intend to run Windows 3.1. Usually, you can do this either
before or after you run Setup. However, when you are running Setup with the /N
option (Setup /N), you may need to regenerate IPX.COM before running Setup to
avoid receiving Setup Error #S019.

For more information on using Novell NetWare software and Windows 3.1, please see
section 2.10 of the NETWORKS.WRI file.

The Novell products included here are manufactured by a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding these products'
performance or reliability.

Additional query words: 3.10 3.11 Gen ReGen 3rdparty net ware light

======================================================================
Keywords          :  
Technology        : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311
Version           : WINDOWS:3.1,3.11

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 1999.